Good for adapting a Holley 4412 to a 4 b
baitfish
North Plains, OR, USA
I have purchased and still use two of these adapter plates to mount a Holley 4412 onto a stock SBC 14096242 intake to meet local Street Stock racing rules. This is the cast iron copy of the Z-28 High rise manifold.
The plate works well for this purpose but you may need to modify the outer slots to make them wider. Example: to mount this plate using ARP 200-2401 studs instead of the provided Speedway 13560 studs onto the 14096242 manifold, I had to machine the slots out to allow the plate to fit over the studs do to dimensional interference caused by the slots being too narrow and/or off center to the SBC stud mounting holes. Note; this may be an issue only on this exact manifold and/or only when using the ARP studs, but this has been my actual experience.
I purchased my two adapters 5 years apart in time and had to perform the same modification to both. It is a good product, but don?t be surprised if you need to modify it slightly to work on a stock SBC manifold.