ACCEL 83 lb per hour Low Impedance Performance fuel injector provides precise control of fuel delivery & atomization for increased power, improved throttle response & better fuel economy. All new units; not modified stock units or remanufactured from used cores. New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles. EV1 design, can be used with gasoline, E85 or Methanol. Provides precise control of fuel delivery and atomization for increased power, improved throttle response and better fuel economy. All-new units, not modified stock units or remanufactured from used cores. New low-mass disc design ensures accurate metering control even at ultra-low and high duty cycles. Operates at higher fuel pressures without loss of metering control. Great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance. Low- and High-impedance designs available to match most commercial applications.

ACCEL DFI 83 lb per hour performance fuel injector provides improved throttle response.

Provides Precise Control Of Fuel Delivery
Provides Better Atomization For Increased Power
Provides Increased Throttle Response
State Of The Art Manufacturing Processes

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

CA Prop 65

CARB warning

Accel 74607 Specifications

KEY SPECS
MFG. Part #	74607
Brand	Accel
Injector Plug Style	EV1/Jetronic/Minitimer

GENERAL
Overall Height	2.88"
Outside Diameter	0.973"
Wiring Harness Included	No
Fuel Rail O-Ring Outside Diameter	0.574"
Manifold O-Ring Outside Diameter	0.573"
Seat to Seat Height	2.27"
Driver Type	4/1A peak and hold
Injector Impedence	Low
Injector Impedance - Ohms	2.3 ohms
Injector Advertised Flow Rate	83 lbs./hr.
GTIN Code	743047746073
Sold in Quantity	Each
O-Rings Included	Yes

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.