|
#91084112-1.75
Speedway 3rd Generation Hydraulic Round Tubing Bender, 1.75 Inch Die
- Bends round tubing up to 90 degrees which works perfect for roll cages, frame crossmembers, and chassis components
- Incremental marks cast into dies makes it easy to reproduce bends
- For use with up to .110" wall thickness mild steel or .096" wall thickness chromoly round tubing
$462.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Product Summary
- Bends round tubing up to 90 degrees which works perfect for roll cages, frame crossmembers, and chassis components
- Incremental marks cast into dies makes it easy to reproduce bends
- For use with up to .110" wall thickness mild steel or .096" wall thickness chromoly round tubing
- Comes with one aluminum die in the size of your choice 1", 1-1/4", 1-1/2", 1-5/8" or 1-3/4"
- 7" bend radius dies are also sold individually if you need to bend a different size tubing later
Comes as a Kit
View Kit Components
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91084112-1.75 Details
Speedway Motors 91084112-1.75 Details
Hydraulic Manual Tubing Bender For Your DIY Fabrication Needs
- Perfect as a roll cage tube bender, roll bar, crossmember or bumper construction 8-ton jack housed inside a sturdy frame handles mild steel up to .110-inch wall or Chromoly up to .096 inch thick wall
- Maximum bend is 90 degrees
- Incremental marks cast into dies makes it easy to reproduce bends
- Portable design you can take anywhere
- Machined steel followers
- Includes your choice of one die, other sizes available separately
You’re ready to get to work on your roll cage, frame crossmember, bumper, or other chassis component—and we’re ready to help you with our 3rd Generation Hydraulic Round Tubing Bender. Our affordable tubing bender bends round chromoly tubing or mild steel tubing up to 90 degrees.
An eight-ton hydraulic jack housed inside a sturdy frame handles bending tube like a professional, yet the entire assembly weighs under 50 lbs.
The 3rd Generation Hydraulic Bender comes with your choice of one of five available, replaceable aluminum dies for round tubing with outer diameters (OD) of 1-inch, 1.25-inch, 1.5-inch, 1.625-inch, and 1.75-inch diameter tubing. We have dies available for other tubing diameters when you're getting ready for a new project.
It has 7-inch bend radius dies for all five tubing sizes and incremental marks cast into dies that make it easy to reproduce bends. You can use it with up to .110-inch wall thickness mild steel or .096-inch wall thickness chromoly round tubing. Our 3rd Generation Hydraulic Round Tubing Bender is an affordable way for anyone to invest in their own tube bender at a fraction of the cost of what you'd pay to bend tube at a shop.
Charts
910-84112 Instructions (PDF)
Speedway Motors 91084112-1.75 Specifications
Speedway Motors 91084112-1.75 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91084112-1.75 |
| Brand | Speedway Motors |
Ratings & Reviews
4.3
65 Reviews
Customers have overall satisfaction with our 3rd Gen Hydraulic Tube Bender, noting it as an excellent entry-level tool for DIY projects involving bending and shaping metal. Users appreciated the device's usability in creating racecar parts, roll cages, and bumpers. The bender's compact size, easy stowage, and quality construction were praised. Users recommend using a digital angle finder for precise bends. Several users reported problems with dies breaking, wrinkling bends, or not achieving tight bends. But, compared to some competitors, our product showed better performance and quality. Remarkably, several users, including long-term customers, suggested our bender for its efficiency and good value for money.
Ratings & Reviews
4.3
65 Reviews
Customers have overall satisfaction with our 3rd Gen Hydraulic Tube Bender, noting it as an excellent entry-level tool for DIY projects involving bending and shaping metal. Users appreciated the device's usability in creating racecar parts, roll cages, and bumpers. The bender's compact size, easy stowage, and quality construction were praised. Users recommend using a digital angle finder for precise bends. Several users reported problems with dies breaking, wrinkling bends, or not achieving tight bends. But, compared to some competitors, our product showed better performance and quality. Remarkably, several users, including long-term customers, suggested our bender for its efficiency and good value for money.
4.3
65 reviews
5
42
4
13
3
3
2
4
1
3
Most Liked Positive Review
5.0
Great bender
I have owned this bender for 3 years now and bought it used from someone who owned it for 2 years. I have used it to build 2 tube rock buggies, a cherokee cage and a wrangler cage. I have no issues with the way it works. I don't see how people break the dies using inferior material then me. I use 1 3/4" .120" wall DOM and my dies are all in perfect working condition. I replaced the ram with a air/hydro ram.
Most Liked Negative Review
3.0
Just a good bender
This is just a good bender over all. It is easy to use and with the help of an angle guage you can duplicate bends. The only draw back I experianced was the poor quality of the die. I used this bender for a street stock cage and after making only 31 bends (using 1.75" X .090" DOM mild steel tubing the sides of the die are cracking and splitting. Not what I expected. I've attached photos of the cracks and if you look close you can see how the sides are bowed out also.
Filter by Ratings
Great bender for the money
5.0
3 months ago
TMM
Texas
Verified
I needed an affordable bender to do some rollcage work and this one worked perfectly. Nice smooth bends. Very pleased with how it works.
Would Recommend
Works great
5.0
3 months ago
Mil87
Beecher
Verified
I'm using this to bend bumpers and nerf bars for a rzr170, very easy to use no real physical strength needed
Would Recommend
I would purchase this tube bender again
5.0
9 months ago
uncle joe
Tampa fl
Verified
this has to be the best tube bender on the market made bending chassis tubes so much easier
Would Recommend
fed ex shipping sux
1.0
10 months ago
bill
lenoir city tn
havent seen it yet
I wish I bought this sooner
5.0
a year ago
Rob
Ashtabula ohio
Verified
I'm a local budget racer. This fit our budget and works great for our needs.
Would Recommend
Works great
5.0
a year ago
Ashton
Clarksville tn
Verified
Super easy to put together and works flawlessly
Would Recommend
Excellent entry level tube bender
5.0
a year ago
Mike K
Helena, MT
Verified
Although it takes longer to make bends the price is certainly right for someone building for a hobby.
Would Recommend
Great product
5.0
a year ago
Buzz
Painesville ohio
Verified
Easy to use
Would Recommend
I would definitely buy this product again
5.0
a year ago
Joe
Crandon Wisconsin
Verified
It works amazing!…it's everything you would need in your personal shop to make perfect bends!
Would Recommend
I would buy again
4.0
a year ago
Big E
Blacksburg sc
Verified
Bender works great.. it had a little rust on some of the pieces but no big deal
Would Recommend
Showing 10 of 65 reviews
Questions & Answers
Questions & Answers
15 Questions • 11 Answers
Is there a minimum tube thickness you bend for 1.50" OD chromoly?
by Jonathan
• 6 years ago
1 answer
View Answer
Is this bender capable of bending square tubing?
by Robert
• 7 years ago
1 answer
View Answer
Is there a compatible air/hydraulic ram that can be used forthis application?
by Nathan
• 7 years ago
1 answer
View Answer
i have tried,to bend 1.75 095 and out of 5 bend it has crinkle the bottom of the tube. ive tried the oil and paper trick still crinkled is there any trick ? ive only wasted 3 sticks of tube trying to use this bender
by tking
• 9 years ago
1 answer
View Answer
Does the 1.75 die fit the 1.75 OD roll bar tubing and can it bend without kinking or flattening out when doing a 90 degree bend?
by Robert
• 9 years ago
1 answer
View Answer
Great bender but the Chinese jack only built one cage and patched a few bars and it has given up the ghost. leaks badly out of the jack pump mechanism. Is the Chinese replaceable. Boy how nice if there was a good old fashion made in the USA jack available. Even if it cost three times as much we would be racing for years with this bender. If jack replacement is available what part # and price please.
by Daddy the money tree
• 9 years ago
1 answer
View Answer
just got the bender and bent a piece of 1.75 on a 90 and it wrinkled the pipe on the inside of the bend is there a way around this
by tmt
• 9 years ago
1 answer
View Answer
Will this bender work on 1 1/2, .065, mild tubing?
by Oly51
• 10 years ago
2 answers
View Answers
Will this bend 1.75 ERW round tubing with .095 wall thickness without kinking? Thanks
by Mike
• 10 years ago
1 answer
View Answer
I would like to purchase this bender/die, but I would like to use my air over hydraulic bottle jack... Can you please tell me the packaging dimensions of the space occupied by the manual jack? For example, how big L x W x H of a jack will fit inside bender's frame
by Mhenry
• 10 years ago
1 answer
View Answer
10 of 15 questions shown