|
#91084113
Starting from
$168.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese cast aluminum die sets for our 3rd Generation Tubing Bender are available in 5 individual sizes from 1", 1-1/4", 1-1/2", 1-5/8", and 1-3/4" sizes. Each die set size sold individually - choose size.
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Size to see |
| Brand | Speedway Motors |
| Material Type | Aluminum |
| GENERAL | |
| Sold in Quantity | Each |
4.6
26 Reviews
Customers commend the product for its high-quality fabrication, practicality, and excellent performance in bending tubing. The sturdy build and safety of the dies were praised, contributing to good results with no damage or deformation to the material. This bender comes recommended by regular users for chassis builds and structural engineering, serving well under frequent use. The improved design of latter generations and availability of different die sizes added further convenience. Despite a few initial adjustments with certain benders for a perfect fit, consumers spoke positively about their overall experience. Satisfaction was high with all major aspects of this tubing bender, making it a solid choice over competition.
4.6
26 reviews
5
18
4
7
3
0
2
0
1
1
Most Liked Positive Review
5.0
Easy to use! I
I bought the 3rd gen tubing bender from Speedway & used it to build my roll cage for my race car. I needed another size die for the bender & Speedway sells them separately also, I ordered it and it was shipped quickly as always. The die arrived & I changed it out quickly & easy. I was making a new cross member within minutes. Thanks again Speedway for always having what I need!.......Frank
Most Liked Negative Review
1.0
No. also tell everyone how it don't make complete 90.
Tried to make a roll cage. But it don't make good 90's. A builder needs good 90's not 85-87 degrees bends.
Filter by Ratings
I will be buying the rest of the set
5.0
6 days ago
Jd
Marion IN
Verified
Works great for my cage and don't and rear hoops on my mod
Would Recommend
I would buy again
5.0
3 months ago
zig
mass.
Verified
bending tube
Would Recommend
Great tubing bender.
5.0
a year ago
I-Fab
Newport, Oregon
Verified
So I run a small do it all shop. Sheet metal, machining wood working and such. I had to bend up some tubing for a green house project where I needed a straight piece with 75 degree kick. Using chain link fencing top rail 1-3/8" OD. Even though the tubing was 1-3/8" and the dies was 1-1/4" it did the job. Could not use the 1-1/2" die as it was to big. The bender did the job like a pro.
Would Recommend
Highly recommended
4.0
a year ago
Doodle Bob
Sweetwater Texas
Verified
Come in super fast and the box was not all beat up. Exactly what I needed. Little higher price than I wanted to pay but overall I'm satisfied
Would Recommend
Definitely recommended
4.0
a year ago
Doodle Bob
Sweetwater Texas
Verified
They came in super fast and the box was not all beat up. Exactly what I needed. Little higher price than I wanted to pay but overall I'm satisfied
Would Recommend
I will definitely be buying more from Speedway
4.0
a year ago
Doodle Bob
Sweetwater Texas
Verified
Amen super fast and the box was not all beat up. Exactly what I needed. Little higher price than I wanted to pay but overall I'm satisfied
Would Recommend
Nice product
5.0
a year ago
Buzz
Ohio
Verified
Good for bumper making and engine bay bars have not tried anything to complicated
Would Recommend
No. also tell everyone how it don't make complete 90.
1.0
5 years ago
Dis satisfied
Omaha Nebraska
Tried to make a roll cage. But it don't make good 90's. A builder needs good 90's not 85-87 degrees bends.
Would Not Recommend
Just what I needed.
5.0
5 years ago
RICK
SAn DIego
Verified
I needed to band some tubing and this die was perfect
Would Recommend
I would buy this product again
5.0
6 years ago
Leprechaun
Ky
Verified
I hade to make bushings to fit my old bender but worked great
Would Recommend
Showing 10 of 26 reviews
6 Questions • 10 Answers
Can I use this by hand with some kind of handle and/or foot pedal?
by Tim
• 7 years ago
1 answer
View Answer
How thin of 4130 can you bend without wrinkling the tube? .065?
by P.Stasa
• 7 years ago
1 answer
View Answer
I already have the bender, looking at other dies. Currious how thick of pipe can be bent wthout damages? .250? Thanks
by Harris
• 9 years ago
1 answer
View Answer
Can I use this bender for smaller than 1" diameter? Hi How can you use this bender for smaller dimmers, say 3/4"? If I was to put a 3/4" tube in the 1" dies will I get acceptable results? Also can this bender handle stainless steel? Thanks Regards Bisher
by Bisher
• 12 years ago
4 answers
View Answers
will these die sets fit the LOW-BUCK bender which looks exactly like Speedways?
by ALLG
• 12 years ago
2 answers
View Answers
how do i know what generation my bender is .are dies good for 2nd and 3rd generation
by racerpic1
• 12 years ago
1 answer
View Answer
6 of 6 questions shown
