3-Inch One-Piece Spoiler Kit, IMCA Northern SportMod Claim Engine

• Approved for IMCA Northern Sport Mod when using a claim engine
• Main spoiler made from a single piece of 66-inch wide .063-inch aluminum
• Side plates/braces place main spoiler at 45-degree angle
• All components pre-drilled for assembly and installation with 3/16-inch rivets
• Wing enhances downforce and stability while being within IMCA Northern SportMod rule specifications

Improve Your IMCA Sport Mod’s Stability and Handling with A One-Piece Spoiler

When it comes to circle track racing there are a lot of variables in how your race car reacts to the track surface. Shocks, sway bars, tires, weight placement, and of course power output all play a part in your race car’s handling and traction (both forward bite and side bite). Depending on the class you are racing you may or may not be allowed some “aero” on your body. When it comes to IMCA racing and the SportMod class, and whether you are running under IMCA Northern SportMod rules or Southern SportMod rules, you are allowed to run a rear spoiler. This rear spoiler no doubt helps with rear downforce, affecting your race car’s traction and handling as well. Depending upon series and class and the engine you are running will determine what your rear spoiler height limit will be.

Our IMCA-approved SportMod rear spoilers are made from 0.063" 3003-H14 aluminum with the main spoiler being one piece for strength. The braces, or end plates, are made from the same material, with all three pieces being pre-bent and drilled for assembly and installation to your body using standard 3/16-inch rivets. The 3-inch spoiler shown here is currently the IMCA Northern SportMod rules approved version for when a claim engine is used. The 66-inch long one-piece spoiler features a total height of 3.60-inches, which includes a .50-inch top lip bent at 30 degrees. The bottom of the spoiler utilizes a 1-inch strip, bent at 45 degrees for attaching to your IMCA Sport Mod’s body. The side braces are 14.50 inches in length with a front height of 3 inches that rises to 6 inches at the rear. These side braces include a 1-inch bottom flange at 90 degrees for mounting to your IMCA racing SportMod’s body, along with a 30 degree .50-inch top lip to match the main spoiler. Attachment of the braces to the main spoiler is via three 3/16-inch rivet holes that align with a 90 degree mounting tab on each end of the spoiler. Be ready for the 2025 IMCA Sport Mod racing series with our IMCA racing one-piece rear spoiler kit for your SportMod racer.