3/16 Inch PVF Coated Steel Brake Line Kit, 3/8-24 IFF

Speedway makes plumbing brake lines easy with this steel brake line kit that includes new lines and fittings to make your job less stressful.

Kit Includes:

• (1) 25 Ft. Roll of Speedway 3/16 Inch PVF Coated Steel Brake Line
• (2) Speedway Steel Straight 3/8-24 IFF to -3 AN Male Adapter Fitting
• (1) Pack of 4 Brake Line Mount Tabs with Clips
• (4) Bags of 5 Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
• (6) Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapters
• (2) 3/8 Inch-24 IFF Each Port, Plain Adapter Tees
• (4) 18" Braided S.S. Brake Lines - Straight AN3

Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Speedway 3/16 Inch PVF Coated Steel Brake Line

Now available for your 3/16" brake line consideration is a new PVF Poly-Armour Poly-Vinyl Fluorine coated brake line. 

• PVF coating is a highly durable 'plastic' coating that is 'baked and cured' to the line for a durable finish that provides a clean look and appearance with a dark olive green color
• This provides extra protection from corrosion, debris, and road surfacing solutions
• Also offers superior bend-ability without kinking and bends easier than standard brake line tubing
• This makes Poly-Armour the easiest line to work with-period!
• Underneath the PVF coating is a double-wall, low carbon steel, copper brazed tubing which meets all international and U.S. requirements for brake tubing
• Considered a premium line, Poly-Armour hard line should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel etc.
• PVF Poly-Armour coated line is the perfect choice for the racer for those weekend after race chassis washes week after week or any street rod fabricator wanting to utilize a hard line application for that beautiful finish that will last for years
• Available in a 25' roll of 3/16" line
• This line bends easily and smoothly with hand tools and can be flared with a 37° AN flaring tool, or 45° double flaring tool
• Use in conjunction with our 3/8"-24 inverted flare male brake line nuts, or AN tube nuts and sleeves

Speedway Steel Straight 3/8-24 IFF to -3 AN Male Adapter Fitting

• These steel fittings adapt 3/8"-24 inverted flare female to -3 AN male
• Commonly used in brake systems when converting a 45-degree flare (IF) to a 37-degree flare (AN)

Brake Line Mount Tabs with Clips

• Weld on frame tabs with clips
• Holds the end of your brake line where the hose attaches
• Sold in sets of 4

Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24

• Steel 3/8"-24 IFM thread nuts
• For 3/16" brake line when double flared to 45°

Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapters

• Brass adapter
• Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

3/8 Inch-24 IFF Each Port, Plain Adapter Tee

• This brass tee fitting is commonly used in brake line systems
• Features three 3/8"-24 inverted flare female (45-degree flare) ports

18" Braided S.S. Brake Lines - Straight AN3

• Braided stainless covering over a Teflon inner liner
• Perfect for brake lines, clutch lines and gauge lines
• Straight AN3 fittings on both ends
• 18" each in length
• Zinc Plated Steel Ends

Brake System Builder's Tip (Link)