21/32 Inch Drill Bit, 1/2 Inch Shank, 118 Degree, Black Oxide

21/32" (0.6562") Inch Drill Bit with 1/2" shank. Used to drill out hubs and axle flanges for wheel studs with  0.662"-0.672" knurl diameter.

• 21/32" (0.6562)
• 1/2" Shank
• 118 Deg.

Recommended Press Fit for press-in wheel stud 

• Steel Hub          0.006"-0.016"
• Aluminum Hub   0.010"-0.016"

Tech Tip:  If nearest standard drill bit is too small, you will need to use an appropriately sized reamer to enlarge the drilled hole until it is within the tolerance for the desired press fit.