1965-1969 Chevy Truck 5-Lug Rear Axle Conversion Kit
1965-1969 Chevy Truck 5-Lug Rear Axle Conversion Kit
Speedway Motors

|

#91006569

1965-1969 Chevy Truck 5-Lug Rear Axle Conversion Kit

  • Simple, budget friendly kit allows you to change from 6 lug to 5 on 5" on '65-'69 Chevy 1/2 ton truck rear axles
  • Perfect way to match the front if you changed to a 5 lug pattern on the front of your truck, keeping all the wheel bolt patterns the same
  • Axles measure 30-3/4" from the end of the shaft to the outside face of the axle flange and are 30-spline, will fit stock bearings and seals
See More

$563.99

/kit

In Stock

$574.98

Save $10.99


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

GM 8.875 Inch 12-Bolt Truck, 30.75" Overall Length

  • Simple, budget friendly kit allows you to change from 6 lug to 5 on 5" on '65-'69 Chevy 1/2 ton truck rear axles
  • Perfect way to match the front if you changed to a 5 lug pattern on the front of your truck, keeping all the wheel bolt patterns the same
  • Axles measure 30-3/4" from the end of the shaft to the outside face of the axle flange and are 30-spline, will fit stock bearings and seals
  • Includes new '71-'72 Chevy truck drums and uses the existing brake hardware, fits 10 and 12 bolt axles only, new 12 bolt cover seal included
  • Wheel studs are 1/2"20 thread pitch, new lug nuts may be required, sold separately

Comes as a Kit

View Kit Components

See more details

Key Specs

MFG. Part #91006569
BrandSpeedway Motors
Overall Length30.75"
Spline Count30
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 91006569 Details

If youve upgraded your trucks front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1965-69 rear ends.

  • The axles accept 1971-72 truck drums and use the existing brake hardware
  • Available as a complete kit with axles, wheel studs and new brake drums or the use of the spider gear set
  • Will not work with 1960-62 trucks
  • Axles measure 30-3/4" from the end of the shaft to the outside face of the axle flange and are 30-spline.

Note: Factory 6-lug applications had 7/16" diameter studs and 5 on 5-lug kits have 1/2" diameter studs. 

Item Details

For GM 10 & 12 bolt rearend only!

Speedway Motors 91006569 Specifications

KEY SPECS
MFG. Part #91006569
BrandSpeedway Motors
Overall Length30.75"
Spline Count30
GENERAL
PositionRear
Bolt Pattern5 on 5"
Housing End Style12 Bolt Chevy
Sold in QuantityKit
Shaft Length30.75"

Ratings & Reviews

4.9

21 Reviews

Overall Assessment

The product is praised for its excellent fit and usability, particularly for converting C10 vehicles from 6 lug to 5 lug, making wheel selection easier and contributing to a polished build look. Its high-quality materials ensure safe and perfect installation, proving it to be a user-friendly choice for both car enthusiasts and mechanics. Many customers have repeatedly purchased the product for various projects, highlighting their satisfaction and trust in its quality and performance. The product successfully stands out as the ideal solution for easy, fast, and reliable conversions. Despite some suggestions for production location adjustments, this does not detract from its superior features compared to competitors.

Write A Review

4.9

21 reviews

5

19

4

2

3

0

2

0

1

0

Filter by Ratings

Great product worked perfect

5.0

2 years ago

C10

Iowa

Verified

Worked great. Good product

Would Recommend

I have purchased this product three time

5.0

4 years ago

Chuck

Tucson Az

Verified

Used this on three family generations C10 projects. User friendly, price!!! , shipping

Would Recommend

Perfect install on a 69 C10 with 12 bolt! Great quality.

5.0

5 years ago

Ross

Upstate, SC

Verified

Perfect install on a 69 C10 with 12 bolt! Great quality

Very good quality product, with perfect fitment

5.0

5 years ago

The Don

palacios,tezas

Verified

Palacios, my 1967 c10 from 6 lug to 5 lug

Would Recommend

I would buy this product again if I do another conversion.

5.0

5 years ago

Rcmotorsports

Virginia

Verified

Use on a 1966 c10. Converted 6 lug axle to five lug. Everything fit perfectly.

Would Recommend

axles and drums fit just like factory parts, very easy swap

5.0

5 years ago

R Massey

Jefferson Ga

Verified

If you're trying to convert to 5 lug in the rear to match front disc brakes, these do the trick. Easy to swap out in a couple of hours.

Would Recommend

Fits right

5.0

5 years ago

Valiantsignet200

NC

Verified

The axels fit great. Build looks great. Makes wheel selection easier converting to 5x5 pattern. Especially with disc conversion. Only wish they were made stateside instead of the far east.

Would Recommend

Customer review image
Customer review image

Product ships immediately.

5.0

6 years ago

Brian

Phoenix, AZ

Verified

Converted 6 to 5 lug. Found a later axle but ended up being too wide for my needs. Converted stock axle and all fits as it should.

Would Recommend

Great kit for the rear swap

5.0

6 years ago

Dave

MO

Verified

exactly what is needed to convert your narrow 1967-68 chevy C10 rear axle to 5 lug.

Would Recommend

easy to purchase and exactly what is needed

5.0

6 years ago

locotech

Mazon, il

Verified

installed into a 66 C10 and ready to go

Would Recommend

Load More Reviews

Showing 10 of 21 reviews

Questions & Answers

29 Questions • 18 Answers

Will this fit a 1969 3/4 ton 8 lug rear end?

by Sean

• 7 years ago

1 answer

View Answer

Hi there, I will buy the kit but need longer wheel studs to accommodate aftermarket wheels, do you guys have a y in stock that are a 1/2 longer?thanks much appreciated

by Jason

• 7 years ago

1 answer

View Answer

Hi would these work on my 63 C10 ? In discription it skips that year entirely. Although it does specify 10 and 12 bolt Rear ends. Thanks

by Clint

• 7 years ago

1 answer

View Answer

Do you use the stock rear axle bearing and race with Part# 91006569? Thanks much!

by Robert

• 7 years ago

2 answers

View Answers

What is the OD of the shaft on the hub end where the seal and bearings ride?

by T-roy

• 7 years ago

1 answer

View Answer

does this axle fit into the original size bearing? and will the 65 original brake shoes work or do you have to use 70-72 brakes?

by Russell

• 8 years ago

4 answers

View Answers

I have a 68 c10, after I swap the axles will the drums just slide over the existing brake assembly with no modifications?

by Nick

• 8 years ago

4 answers

View Answers

i was wondering what the measurement the hub is? im looking at wheels at the same time and need to know hub bore

by Anthony

• 8 years ago

1 answer

View Answer

Are these 5 lug axles a direct swap with a 67 rear end? Also do you have a part number to covert the rear drums to a disc brake kit?

by Kromie

• 8 years ago

1 answer

View Answer

I have a 1966 Chevy truck 1/2 ton LWB. Factory it's 6 lug and I really want to put cragars or American torque thrust rims on it 5 lug Andy I just want to make for sure that these will fit right on into the truck or will I have to make any modifications to make them fit. I no power brakes or steering. Trying to keep it as original as I can thank you

by BLUE66Chevy

• 9 years ago

2 answers

View Answers

Load More Questions

10 of 29 questions shown

Fitment

                                  Customer Impersonation Script