|
#9101375
$176.99
/kit
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Disc/Drum Brake System Type, Tandem Outlet Count
Comes as a Kit
View Kit Components
| MFG. Part # | 9101375 |
| Brand | Speedway Motors |
| Master Cylinder Bore Size | 1 Inch |
| Master Cylinder Material | Cast Iron |
| Finish | Natural |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyMaster Cylinder
These high-tech Corvette-style master cylinders were designed using OE specifications and 100% tested. They have a 1" bore and are suited for disc/drum combinations. Each master cylinder is ported on both the left and right sides, allowing for installation in many different applications. This exclusive design features a mating flange that works with applications requiring 3-1/8” through 3-3/8” bolt patterns. These master cylinders will work with manual or power brake systems and can be quickly changed with the included adapter pin to plug the deep well. The wide body and low profile gives this master cylinder the clearance you need when installing in tight areas and yet it maintains a large volume of fluid necessary for 2 and 4 wheel disc brake applications.
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article.Brake System Selection.
Bracket
This bracket allows you to replace that old single reservoir master cylinder with a modern dual reservoir unit. Bracket bolts to the frame and re-uses your original brake pedal. Designed for all disc and drum brake systems.
Accommodates master cylinders with bolt center spacing of 2-7/8" to 3-3/8".
Charts
Brake System Builders Tip (JPG)
916-31947 Instructions (PDF)
| KEY SPECS | |
|---|---|
| MFG. Part # | 9101375 |
| Brand | Speedway Motors |
| Master Cylinder Bore Size | 1 Inch |
| Master Cylinder Material | Cast Iron |
| Finish | Natural |
| GENERAL | |
| Brake System Type | Disc/Drum |
| Outlet Count | Tandem |
| Reservoir Type | Integral |
| Stroke | 1.0625" |
| Reservoir Included | Yes |
| Number of Mounting Holes | Two |
| Master Cylinder Cap Included | Yes |
| Master Cylinder Bail Type | Double Bail Wire Zinc Lid |
| Outlet Fitting | 3/8"-24 IFF |
| Overall Width | 4.5" |
| Overall Height | 4.75" |
| Mounted Length | 8" |
| Centerline of Holes | 3.38" |
| Sold in Quantity | Kit |
4.5
4 Reviews
Customers highly recommend the product for its confirmed performance and reliability. The product has been praised for its practicality and for delivering exactly what it promises. Its ease of use and high material quality are noted, signifying a emphasis on safety. Despite not being thoroughly tested post-installation, customers express confidence in its problem-free operation. This product stands out for its superior features and quality in comparison to competitors.
4.5
4 reviews
5
2
4
2
3
0
2
0
1
0
Filter by Ratings
Great conversion kit
4.0
a month ago
59 Apache Truck
PA
Verified
The kit was good however the directions were terrible. The extension rod was too long needed to be cut and the mounting bolts did not fit the factoring welded back plate. You need to buy bolts and cut the rod. If the directions were better it may help
Would Recommend
Yes
5.0
6 months ago
Timmy
Canada
Verified
Product fit well.
Would Recommend
Yes, I would buy this product again.
4.0
2 years ago
Buka
Sacramento Ca
Verified
I'm sure there will no issues with the product but I have not test diving my vehicle since the installation.
Would Recommend
I would buy & recommend this product to friends
5.0
3 years ago
chad
Boise Idaho
Verified
did exactly what it said it would do worked great
Would Recommend
Showing 4 of 4 reviews
Be the first to ask a question.
1955-1959 Chevy Truck
