1955-57 Chevy Rear Sway Bar Kit, 7/8 Inch
1955-57 Chevy Rear Sway Bar Kit, 7/8 Inch
Speedway Motors

|

#113253

1955-57 Chevy Rear Sway Bar Kit, 7/8 Inch

  • Achieve flatter cornering
  • Black powder coated finish
  • Adds to cornering stability at speed
See More

Diameter:

7/8 Inch

3/4 Inch7/8 Inch (Nomad)

$201.99

/each

In Stock


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Rear Position, .88" Diameter, Steel, Powder Coated

  • Achieve flatter cornering
  • Black powder coated finish
  • Adds to cornering stability at speed
  • Solid steel diameter bar
  • Includes polyurethane bushings for increased responsiveness
See more details

Key Specs

PositionRear
Diameter.88"
Bushing MaterialPolyurethane
Material TypeSteel
FinishPowder Coated
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 113253 Details

These rear sway bar kits are designed as a performance replacement upgrade for your classic tri-five Chevy passenger car. They feature a 7/8" diameter solid steel bar and come with all hardware needed for a successful installation. If your 1955-57 Chevy came with an anti-sway bar from the factory, chances are this kit will be a direct replacement. If it did not, a small amount of drilling will be required for installation of the sway bar kit.

  • Achieve flatter cornering
  • Complements front sway bar to reduce understeer and gain more neutral handing
  • Adds to cornering stability at speed
  • Solid steel 7/8" diameter bar
  • Includes polyurethane bushings for increased responsiveness
  • Black powder coated finish
  • Corrosion resistant zinc plated hardware included

Fits:

  • 55-57 Chevrolet Full Size & Station Wagon

Speedway Motors 113253 Specifications

KEY SPECS
MFG. Part #113253
BrandSpeedway Motors
PositionRear
Diameter.88"
Bushing MaterialPolyurethane
Material TypeSteel
FinishPowder Coated
ColorBlack
GENERAL
Hardware IncludedYes
Rear Sway Bar TypeSolid
Rear Sway Bar Diameter0.875"
Sold in QuantityEach

Ratings & Reviews

4.8

13 Reviews

Overall Assessment

Customers find the product high-quality and practical. It features easy installation, with most users completing this within about 2 hours, bolting right up without issues. It's noted to fit perfectly on various vehicle models, including 57 chevy 9 passenger wagons. Though adjustments may be required for some setups, satisfied customers report it delivers as advertised. However, some modifications may be necessary for some exhaust systems. Despite minor setbacks, many promise to purchase again, indicating its superior performance compared to competitive items.

Write A Review

4.8

13 reviews

5

11

4

2

3

0

2

0

1

0

Filter by Ratings

Would buy another one if I had another Tri-Five

5.0

9 months ago

Rudy

Meriden,ks

Verified

Have no complaints. Is just what I needed. Speedway Motors ships fast. I usually get what I ordered in 2 or 3 days. I'll use them every time unless it's something they don't have. They're still Great!

Would Recommend

Rear sway bar kit

5.0

a year ago

Franklin

Ohio

Verified

Haven't installed it yet but it looks like a nice kit.

Would Recommend

I would use this product again

5.0

2 years ago

Roc

Back mountain, Pa

Verified

Easy installation

Would Recommend

55 Chevy Restoration

5.0

2 years ago

Ken

Newark. Ca

Verified

Works with a Ford 9". Just had to make longer end links and a spacer on bracket to square it to frame.

Would Recommend

I would buy this product again if I needed it.

5.0

3 years ago

Bones

Bartlesville. Okla

Verified

Haven't had time to install it yet. It looks great and delivery prompt

Would Recommend

Everything is good,bolted right up

5.0

3 years ago

Cph

Angleton Texas

Verified

Great product

Would Recommend

I would buy this again.

5.0

4 years ago

dave

DeForest wi.

Verified

Works very well.Installation was about 2 hrs.

yes, it did what I was looking for

4.0

5 years ago

David

Red Bluff,Ca

Verified

Product was as advertised

Would Recommend

great fit on my 57 chevy 9 passenger wagon

5.0

5 years ago

hot rod austin

calhoun ky

some people say this may not fit a standard 6 passenger wagon, but i suspect it might be possible. i CAN say ,with certainty it WILL DEFINETLY FIT a 9 passenger tri-five wagon. mine being a 57. the sway bar is bent so the center "bump out" section angles pointing downward about 35 degrees angle so to hang low enough to clear the sparetire carrier and helping it to tuck under the ring gear bulge in the axle housing. and depending on what clearances are needed for various axle set ups... the bars clamps can be rotated slighty to add even more room depending on where you need it. i had a ford 9inch axle housing in mine, and i had NO issues of clearence. the hardware was good and it was easy strait forward install. i am completly satisfied. i can add that the standard 6 passenger wagon fuel tank might possiblly make clearance more challenging (because the tank wraps around the ring gear bulge). the only possible solution in THAT case would be to use spacers in between the bar and axle mounts.

Would Recommend

Measure Before Buying

4.0

6 years ago

Sam

Bakersfield, CA

Verified

This product requires the modification of the exhaust system. If you have exhaust that goes over the rear axel, it must be removed. I will not cut my customer exhaust, therefore I am returning the item. It doesn't come with any type of bushing lubricant.

Would Not Recommend

Load More Reviews

Showing 10 of 13 reviews

Questions & Answers

4 Questions • 4 Answers

how close would this be to fit a 1957 Pontiac with leaf springs

by none

• 7 years ago

1 answer

View Answer

Could this rear sway bar be used on a 1954 Chevy BelAir?

by Harry

• 8 years ago

1 answer

View Answer

Will this sway bar work with your control arms, part number 91095557, without modification? The control arms have mounting tabs on them.

by Scots50

• 8 years ago

1 answer

View Answer

what is the length hole to hole and length of the side arms?

by Norm

• 10 years ago

1 answer

View Answer

4 of 4 questions shown

Fitment

              Customer Impersonation Script