|
#91019542
$441.99
/each
In Stock
Garage Sale alternatives: from $374.39
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Frame Position, Disc/Drum Brake System Type
| MFG. Part # | 91019542 |
| Brand | Speedway Motors |
| Brake System Type | Disc/Drum |
| Reservoir Type | Integral |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyUse this great conversion kit to make your old Chevy stop safely and reliably when converted over to an automatic transmission application. Use in conjunction with front disc brake conversion 910-1954 and rear drum brakes.
Works well when used with 1949-54 Chevy car front disc brake conversion kit 910-1954.
Application
Charts
Booster Tech Tip (GIF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91019542 |
| Brand | Speedway Motors |
| Brake System Type | Disc/Drum |
| Reservoir Type | Integral |
| GENERAL | |
| Position | Frame |
| Master Cylinder Mount Type | Reverse |
| Pedals Included | Brake |
| Master Cylinder Count | 1 |
| Outlet Count | Tandem |
| Outlet Fitting | 9/16"-18 |
| Master Cylinder Material | Steel |
| Brake Booster Included | Yes |
| Balance Bar | No |
| Sold in Quantity | Kit |
| Brake Booster Type | Vacuum Diaphragm Dual |
| Brake Booster Diameter | 7 Inch |
4.3
7 Reviews
Customers highly recommend our product due to its easy installation and practicality, especially for old Chevys, emphasizing that there are usually "No Problems at all". The product is acknowledged for its substantial improvement of brakes without needing frame modifications. Many users note the 'easy to install' quality of it, even asserting, "if someone can't install this system they shouldn't be working on cars". The product comes with a master cylinder bleed kit and instructions. Despite being slightly weak where the front brake lines are mounted, its aluminium proportional valve is appreciated. Some note that the system hangs a bit low under a car, which can be a risk for lowered cars. However, the product's effectiveness once installed is praised and it is said to work "great".
4.3
7 reviews
5
4
4
2
3
0
2
1
1
0
Filter by Ratings
I would recommend this to everybody !
5.0
6 years ago
Mike
Watson, Louisiana
Verified
Easy to install no cutting , grinding No Problems at all
Would Recommend
No Frame Mods Required!!
4.0
6 years ago
Murffiee
Alberta, Canada
Verified
My sbc350/400 is on a stock frame in my .52 deluxe. There's no room on the firewall for anything so this was a great option! My bracket came slightly assembled so it didn't sit right at first. Just needed too pull the bolt out and spin the lever until it worked.
Would Recommend
Good quality product and easy to install.
4.0
6 years ago
Hesselberg´s Garage
Esbjerg, Denmark
Verified
This product is a great improvement to the brakes on old Chevys. Could have had some instructions included, regarding the porportional valve and how to mount the brake lines to it. The bracket needed a 1 inch hole drilled, to clear a frame rivet in the mounting area. When mounted, the entire system hangs a bit low under the car, specially if you have a lowered car, there is a risk of damage to the system, if you drive over a speedbumb or driveway curbs. I will problaly mount a steelplate under the car, to protect it. The porportional valve is in aluminium, and its a bit weak, where you mount the front brakelines. Even with the right fittings, there should have been some more/deeper threads. (deeper bore) The kit comes with a master cylinder bleed kit and instructions. Nice! All in all a good product that I would recommend to others.
Would Recommend
I would recommend this product it works great. Thanks
5.0
7 years ago
Manny
Milpitas ca
Verified
It work great on my 49 Chevrolet coupe
Would Recommend
Looks well made, BUT...
2.0
8 years ago
Se ludwig
Reseda, Ca
Verified
Unit came assembled. I was very disapointed that there was NO Installation Instructions included in package. Had to Chat with SPEEDWAY to get installation instructions for each component. CPP assembled this unit for SPEEDWAY.
Would Recommend
Yes
5.0
9 years ago
Psycho Paul
Lakewood, Co
Verified
Very nice kit if someone can't install this system they shouldn't be working on cars.
Would Recommend
Works Great
5.0
11 years ago
MJTS
St. Louis, Mo.
Verified
The Power Brake Unit has been installed and works great. Big difference between the manual brakes and the power boosted brakes.
Would Recommend
Showing 7 of 7 reviews
19 Questions • 13 Answers
does part number 91019542 come with a under the dash set up ? or do you sell this set up without the peddle set up. it has the 4.75 mounting bolt pattern that I need. I am trying to replace parts that were bought years ago but decided to go for a walk one day never to return.
by craig bradshaw
• 5 years ago
1 answer
View Answer
Hello guys I have a 51 Chevy Bel Air, I purchased a new Curry 9 plus rear end for 55 through 57 Chevrolet it's a complete rear end it was a crate rear end I need to know if you offer a brake line kit for this rear end and a complete underfloor power master cylinder kit and also the rear end that I purchased has 12 inch drum brakes. What's diameter brake line do I need 4 conversion into my 51 Bel Air, also I need a complete brake line kit from front to rear for the 51 body style also I'm considering changing the disc brakes on the front and I would need to know what type of valves I would need on the braking system I know this is a lot to ask but I have to purchase it I've already purchased the rear end and done a lot of work on the car so I want to complete the car and make it the most safe to drive thank you for your time I'll look forward do your answers also if you can help me with this I need the part numbers for the above items. Thank you so much for your time ricky
by Rick
• 6 years ago
1 answer
View Answer
In the question from lamchop two years ago: Johns answer mentions a return spring. If you need a return spring why didn't it come with the kit? I installed this in my 50 Chevy sedan and it definitely needs a return screen. Was it supposed to come with it ? Can someone explain please.
by Ed
• 7 years ago
1 answer
View Answer
Hello! I have a 1950 Chevy Styleline Deluxe with a 350 / 350 combo installed. I have the disc brakes kit (9101954) in the front and 10" Mustang drum brakes in the rear. I am looking for a complete pedal/brake booster kit, to fit under the floor. What should I order? Can you supply me with the order numbers, for the complete parts needed? Also, I need to install dust/protection plates on my disc brakes in the front. Do you have some, that will work with kit 9101954? Thanks! I appreciate your help! Anders from Denmark.
by Anders
• 7 years ago
1 answer
View Answer
Working on a 53 bel air,on the underfloor booster with disc/drum do I need a residual valve,also can the stock brake switch still work.
by Tpg
• 8 years ago
3 answers
View Answers
What brake light switch is recommended for this?
by Brian
• 8 years ago
1 answer
View Answer
How can this be done with manual transmission?
by Jani
• 9 years ago
1 answer
View Answer
What's the best brake fluid for this set up
by Me
• 9 years ago
1 answer
View Answer
how do you adjust the "freeplay" in the brake pedal with thjis kit?
by lamchop
• 9 years ago
2 answers
View Answers
What brake pedal do you recommend to be used with this kit?
by Charles
• 9 years ago
1 answer
View Answer
10 of 19 questions shown
1950-1954 Chevy Bel Air
1953-1954 Chevy Corvette
1949-1952 Chevy Fleetline
1953-1954 Chevy One-Fifty Series
1949-1954 Chevy Sedan Delivery
1949-1952 Chevy Styleline Deluxe
1949-1952 Chevy Styleline Special
1953-1954 Chevy Two-Ten Series
