|
#91011527
$71.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select an engine to verify Fitment
Select Engine
Gasoline Fuel Type, 1/2" NPT Fuel Pump Inlet Size
| MFG. Part # | 91011527 |
| Fuel Type | Gasoline |
| Fuel Pump Inlet Size | 1/2" NPT |
| Fuel Pump Outlet Size | 1/2" NPT |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese all new replacement mechanical fuel pumps are designed to fit the 1949-1950 Flathead Ford V8. They feature a 1/2"-20 Inlet/Outlet and are stock design to keep that original factory look.
1/2"-20 Inlet/Outlet
For use on pre-1966 vehicles only
| KEY SPECS | |
|---|---|
| MFG. Part # | 91011527 |
| Brand | Speedway Motors |
| Fuel Type | Gasoline |
| Fuel Pump Inlet Size | 1/2" NPT |
| Fuel Pump Outlet Size | 1/2" NPT |
| Material Type | Aluminum |
| GENERAL | |
| Notes | OEM Spec Replacement |
| Inlet Quantity | 1 |
| Outlet Quantity | 1 |
| Sold in Quantity | Each |
4.6
10 Reviews
The product, a fuel pump, is praised for its great quality, appealing look, and practicality. Customers commend its reliability, with many noting its easy installation on different vehicle models. A particular highlight is its resemblance to stock parts, ensuring a good fit in a range of vehicle models. The pump's operational performance was another regularly confirmed feature, mentioning it works as intended without issues. Users appreciated its design, specifically the sediment bowl. However, there was minor feedback about angled fuel bowls and thread mismatches, but these were resolved without affecting overall usability. Some customers saved money due to the pump's durability, preferring our product to competitors'. Many would buy it again, signaling trust in the product's longevity.
4.6
10 reviews
5
7
4
2
3
1
2
0
1
0
Most Liked Positive Review
4.0
nice looking part
i like the looks of this pump with the sediment bowl looks stock, removed top to inspect pump diaphragm for debris that could cause the external fuel leak and inspected the check valves for debris that could cause the no fuel volume, found nothing.
Most Liked Negative Review
3.0
It works but
The fuel bowl is angled compared to my original. Fortunately it did clear everything and mounted ok. The worst part was the fuel line fittings were incorrect threads. I had a friendly mechanic re-tap for the older fittings.
Filter by Ratings
I would buy it again.
4.0
9 months ago
J
Creston iowa
Verified
The pump works as it should. The fuel line ports were the wrong size and some modifications had to be done. In the end it works fine.
Would Recommend
Flathead Fuel Pump
5.0
a year ago
Jon
Rhode Island
Verified
Perfect fit for my flathead set up
Would Recommend
Iwould buy this again
5.0
2 years ago
Lonnie
Sequim ,WA
Verified
as expected
Would Recommend
I hope I don't need to buy product again and again
5.0
3 years ago
lee
Bandera, Texas
Verified
The fuel pump works great, looks good. Now I will save money for aluminum heads!
Would Recommend
nice looking part
4.0
3 years ago
roadster bob
Las Vegas N.V.
Verified
i like the looks of this pump with the sediment bowl looks stock, removed top to inspect pump diaphragm for debris that could cause the external fuel leak and inspected the check valves for debris that could cause the no fuel volume, found nothing.
I am very pleased with the part
5.0
5 years ago
Old ford truck
Stilwell. Ok. 74960
Verified
Installed it on a truck
Would Recommend
I would buy this part again if I needed another one.
5.0
5 years ago
Bill
Apopka Fla
Verified
Looks to be brand new, it will probably work just fine.
Would Recommend
It works but
3.0
7 years ago
Jake
The County
Verified
The fuel bowl is angled compared to my original. Fortunately it did clear everything and mounted ok. The worst part was the fuel line fittings were incorrect threads. I had a friendly mechanic re-tap for the older fittings.
Would Recommend
Quality Replacement Fuel Pump
5.0
7 years ago
Jimmy
Corpus Christi, Texas
Verified
I installed this fuel pump on my 1950 Ford F1 pickup with the 8BA Flathead V8 engine. Easy to install and worked as it's supposed to.
Would Recommend
Great fuel pump, good fit.
5.0
9 years ago
Pat
Traverse City, Michigan
Verified
I was able to replace the leaky fuel pump on my 1935 convertible in minutes, back on the road in no time.
Would Recommend
Showing 10 of 10 reviews
3 Questions • 3 Answers
I have a 59ab v-8 has fuel pump stand with breather. no fuel pump, I want to run a mechanical pump how do I order the right one Thanks Al Yennry
by al
• 8 years ago
1 answer
View Answer
is the pumping lever cup shape for the rod
by curt
• 15 years ago
1 answer
View Answer
Will this work for the Flathead V6, because I need to replace my fuel pump.
by Josh
• 15 years ago
1 answer
View Answer
3 of 3 questions shown
1953 Ford Club
255 Ford Flathead V8
337 Ford Flathead V8
1953 Ford Country Sedan
255 Ford Flathead V8
337 Ford Flathead V8
1953 Ford Country Squire
255 Ford Flathead V8
337 Ford Flathead V8
1953 Ford Crestline
255 Ford Flathead V8
337 Ford Flathead V8
1949 Ford Custom
255 Ford Flathead V8
337 Ford Flathead V8
1953 Ford Customline
255 Ford Flathead V8
337 Ford Flathead V8
1953 Ford F-100
255 Ford Flathead V8
337 Ford Flathead V8
1953 Ford F-250
255 Ford Flathead V8
337 Ford Flathead V8
1953 Ford F-350
255 Ford Flathead V8
337 Ford Flathead V8
1949-1952 Ford F1
255 Ford Flathead V8
337 Ford Flathead V8
1949-1952 Ford F2
255 Ford Flathead V8
337 Ford Flathead V8
1949-1952 Ford F3
255 Ford Flathead V8
337 Ford Flathead V8
1953 Ford Mainline
255 Ford Flathead V8
337 Ford Flathead V8
1953 Ford Ranch Wagon
255 Ford Flathead V8
337 Ford Flathead V8
1953 Ford Sunliner
255 Ford Flathead V8
337 Ford Flathead V8
1953 Ford Victoria
255 Ford Flathead V8
337 Ford Flathead V8
1952-1953 Mercury Custom
255 Ford Flathead V8
337 Ford Flathead V8
1949-1952 Mercury Mercury
255 Ford Flathead V8
337 Ford Flathead V8
1950-1953 Mercury Monterey
255 Ford Flathead V8
337 Ford Flathead V8
