|
#91015842
Starting from
$91.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Need help?
855.313.9176Quick and Easy Returns
Return PolicyShow some style! Add some sparkle! Replace your 59A flathead's original cylinder head-to-radiator hoses with these polished stainless or chrome-plated pieces. Each kit replaces both upper hoses for a flathead Ford V8 and includes two chrome or stainless tubes, four 3-ply rubber connector hoses, and eight hose clamps.
Application
Specs
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Material to see |
| Brand | Speedway Motors |
| Material Type | Select Material to see |
| GENERAL | |
| Hose ID | 1.78" |
| Tube I.D. | 1.63" |
| Hose OD | 2.15" |
| Tube O.D. | 1.75" |
| Finish | Select Material to see |
| Sold in Quantity | Kit |
| Notes | Select Material to see |
4.5
46 Reviews
Customers appreciated the product's high-quality, durable stainless steel material and appealing chrome or polished finish that enhanced the look of their engines. They deemed it a great project addition, improving the cleanliness and appearance of the engine bay. The ease of installation was appreciated as it helped save time. The kit was found to be an excellent replacement for older, worn-out radiator hoses in various models of cars. However, some customers noted that the hose lengths were at times too short for specific applications, notably for pickups, while some found supplied clamps not to be stainless steel as advertised. Nonetheless, customers would recommend the product and buy it again, valuing its quality and aesthetic appeal.
4.5
46 reviews
5
34
4
5
3
4
2
1
1
2
Most Liked Positive Review
4.0
I would buy this again. Very pleased.
The water outlet on the left side head is slightly closer to the radiator than the right side. So, the left side pipe needed a slight pie cut on the end to shorten the pipe and acheive the proper angle and not end up with a kink in the hose. Also had to shorten both right and left upper hoses about 1/2 inch. Other than that, this product is top notch. The hoses and clamps are high quality and look great. I've put about 30 miles on my 1947 ford since installing these hoses, and have had no problems or leaks. I'm very pleased.
Most Liked Negative Review
3.0
Looks Great
Bought The Kit. Specified 1937 thru 1948 Flathead. I Had To Cut 4 1/2" Off The Top Of The Tubes To Make Them Fit. Not A Bolt On Kit For A 1938 Ford Standard. Have Not Had Any Problems Though. Looks Great.
Filter by Ratings
Yes
5.0
3 months ago
Bruce
Toronto, Canada
Verified
Very nice, at some class to the rebuild
Would Recommend
perfect fit and look great!
5.0
3 months ago
Richie
Benton, KS
Verified
I used the coolant lines to replace the old wore out and broken rubber lines. At first I was going to go back Rubber but the cost was comparable by the time i purchase two rubber lines.
Would Recommend
Looks awesome
5.0
6 months ago
Prostreet57
Illinois
Verified
It's a radiator hose, not much to comment on. It does what it's supposed to do.
Would Recommend
I would buy this kit again
5.0
7 months ago
u10166
Lebanon CT
Verified
I am not ready to hook them up yet but did pull one out to check engine placement and it is good.
Would Recommend
I would buy this product again
5.0
a year ago
Straycat
Fuquay Varina, NC
Verified
Great quality, finish. Fits OEM middle of head outlet and stock radiator. Likely too long for custom (aluminum) radiators with wider heads.
Would Recommend
Looked great but was the wrong size
3.0
a year ago
Rook
Grand forks ND
Verified
The product look amazing and went to put it on and it was the wrong size for the radiator and for the engine so I had to return it I called and talked to a guy with speedway and he looked and there was nothing the size that I needed But would recommend it if you have that size
Would Recommend
I would recommend this product.
5.0
2 years ago
DD
Ridgecrest, Ca
Verified
Fast shipping, packaging was great, parts fit perfectly. High quality materials.
Would Recommend
Chrome Rad Pipes 46' Flathead V8
4.0
2 years ago
RJ
Airdrie, Alberta
Verified
Haven't installed yet, but the rad pipes are not the same shape as the originals, and are a little bit short. the top bent radius is not sharp enough to go in to the rad. I think I'll be able to make it work with a longer rad hose at the top, but the ones in the kit won't work. As the pipe is a little bit shorter as well, i'm hoping it wont create a kink in the hose, as the rad and pipe won't line up nicely.
yes
5.0
3 years ago
ricky ray
Wisconsin
Verified
Great Service, I even got a follow up call!!
Would Recommend
Prefect!!!
5.0
3 years ago
Wreaker
Wisconsin
Verified
Bought these because I had to get an aftermarket radiator. Exactly what I needed. I opted for the stainless steel and happy I did. Well made and quality. Gray addition for the Flathead for sure!!!
Would Recommend
Showing 10 of 46 reviews
9 Questions • 13 Answers
I need to fit the radiator to a 1933 sedan with a 1946 flathead. Which radiator hose kit do I need to buy?
by TDWarren2
• 7 years ago
1 answer
View Answer
I need to replace the rubber hoses, are those sold separately?
by Randy
• 7 years ago
1 answer
View Answer
Does the metal tube part of these hoses come close enough to the neck on the heads to hold the thermostat in place?
by Matt
• 8 years ago
4 answers
View Answers
Will these work on a 36 ford Pickup? Top radiator outlets point slightly down. Rogerr
by Roger
• 8 years ago
2 answers
View Answers
Would these work in 35 ford pickup with a 46 ford v/8 engine? Thanks Roy Green
by 2 Dollar Roy
• 10 years ago
1 answer
View Answer
Since my radiator outlets are closer than the 15" of these tubes I'd like to know if the tube diameter away from the formed ends is truelove 1-3/4". I would like to cut the end close to the radiator and use a bent rubber hose to make the connection there. Thanks
by Glenn
• 11 years ago
1 answer
View Answer
Hi, Can you please provide more detail regarding the top pipe bend? My radiator has straight 1 3/4" outlets and I can't tell whether your kit would work with them. Are the top bends such that a straight in connection to the radiator is possible? Thanks
by Glenn
• 11 years ago
1 answer
View Answer
measurements Do you have the rise and reach dimensions? I am looking for hoses for a flathead in a non-Ford vehicle with a '32 flathead radiator. I have center outlet heads. Overall would be similar to an A-V8. Thanks.
by Katuna
• 11 years ago
1 answer
View Answer
SS hose kit to an Offenhauser aluminum head The hose ends with this kit are 1-3/4 inch but my Offenhauser aluminum heads water outlets are 2 inches. I can't stretch them on. Your hose adapters are 1-3/4 inch max. Can you offer any solution? I bought it all from Speedway. Thank you, Bob
by bschulze
• 11 years ago
1 answer
View Answer
9 of 9 questions shown
