|
#9003014
1930-31 Model A Fiberglass Firewall
- Recessed
- For use with late model engines
- Fiberglass
$248.99
/each
Made to Order
This is a custom fabricated part. We estimate this item will ship on or before October 20th.
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
34.25" Overall Length, 26.75" Overall Height
- Recessed
- For use with late model engines
- Fiberglass
Need To Know
Made to Order
This custom item will ship when completed
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 9003014 Details
Speedway Motors 9003014 Details
This fiberglass firewall features a 3-3/4" deep recession which will allow you to fit late model engines in your '30-'31 Ford Model A.
Ships UPS Oversize.
Speedway Motors 9003014 Specifications
Speedway Motors 9003014 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 9003014 |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Length | 34.25" |
| Overall Height | 26.75" |
| Overall Thickness | 4.63" |
| Material Type | Fiberglass |
| Sold in Quantity | Each |
| Notes | The recessed section is 3.75" deep. |
Ratings & Reviews
2
2 Reviews
Product reviews indicate the 1930-31-Model-A-Fiberglass-Firewall has some construction flaws impacting usability. The lip is reportedly too short for correct attachment, leaving weld holes exposed. Made of thin material, this firewall is described as flimsy, raising concerns regarding its capability for supporting a car's front. It was successfully utilized as a donor piece but was deemed unsuitable for standalone use. The short lip compromised fitting on the car body, suggesting poor compatibility. The product provides a fill-in solution, rather than a total replacement.
Ratings & Reviews
2
2 Reviews
Product reviews indicate the 1930-31-Model-A-Fiberglass-Firewall has some construction flaws impacting usability. The lip is reportedly too short for correct attachment, leaving weld holes exposed. Made of thin material, this firewall is described as flimsy, raising concerns regarding its capability for supporting a car's front. It was successfully utilized as a donor piece but was deemed unsuitable for standalone use. The short lip compromised fitting on the car body, suggesting poor compatibility. The product provides a fill-in solution, rather than a total replacement.
2
2 reviews
5
0
4
0
3
1
2
0
1
1
Filter by Ratings
1930-31-Model-A-Fiberglass-Firewall
3.0
7 years ago
Badbowtie
Canada
Verified
this firewall didn't work as intended. the lip that attaches to the body is to short and does not even cover the weld holes that were drilled out to remove steel wall. it just doesn't fit properly. very thin and flimsy for a part that is suppose to hold the entire front of the car together. In the end I cut the steel fire wall out and then cut out the recess from the fiber glass wall and used the glass piece as a filler on the steel wall. it all worked and looks good . I wouldn't use this fiberglass one by itself. there's no strength to it especially with the lip being so short there really is no good way to make it fit on the body. as a donor piece it works to fill the hole.
Would Recommend
This firewall does not fit worth a darn.
1.0
9 years ago
Matt
Ga
Verified
Doesn't fit and product is to thin
Would Not Recommend
Showing 2 of 2 reviews
Questions & Answers
Questions & Answers
4 Questions • 4 Answers
Is this fire wall body specific or a fit all for all models of the 1930 series Is there a specific fire wall for a 1930 model A two door sedan
by Butch
• 10 years ago
1 answer
View Answer
firewall Could you measure from the top in the middle to the top of the recess where the dis. fits, thanks craig
by lucky92
• 12 years ago
1 answer
View Answer
how much is the firewalll recessed ?
by steve
• 15 years ago
1 answer
View Answer
is this steel or fiberglass
by craig
• 15 years ago
1 answer
View Answer
4 of 4 questions shown
Fitment
Fitment
1930-1931 Ford Model A