1928-1948 Ford Steering Wheel Adapter Hub
1928-1948 Ford Steering Wheel Adapter Hub
Speedway Motors

|

#91632765

1928-1948 Ford Steering Wheel Adapter Hub

  • Fit a steering wheel with modern 3-hole pattern to 1928-1948 Ford steering column
  • Made from premium steel for superior strength and durability
  • Steel hub with 4° taper, works with all Grant wheels
See More

$24.99

/each

In Stock


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Replacement Steering Wheel Style, .36" Flange Thickness

  • Fit a steering wheel with modern 3-hole pattern to 1928-1948 Ford steering column
  • Made from premium steel for superior strength and durability
  • Steel hub with 4° taper, works with all Grant wheels
  • Zinc-plated finish for rust and corrosion prevention
  • Installs onto steering column
See more details

Key Specs

MFG. Part #91632765
BrandSpeedway Motors
Steering Wheel Mount Style3 Bolt
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 91632765 Details

Fit a steering wheel with modern 3-hole pattern to 1928-1948 Ford steering column. Steel hub with 4° taper. Works with all Grant wheels.

Installs onto steering column.

Speedway Motors 91632765 Specifications

KEY SPECS
MFG. Part #91632765
BrandSpeedway Motors
Steering Wheel Mount Style3 Bolt
GENERAL
Steering Wheel StyleReplacement
Overall Thickness1.13"
Flange Thickness.36"
Diameter Small End1.260"
Diameter Big End2.450"
Taper Large End.755"
Taper Small End.680"
Key Width.19"
Material TypeSteel
FinishZinc Plated
Sold in QuantityEach
NotesTAPPERED HOLE. .687 ID. FLANGED END, .757 ID OPPOSITEB END. NOT FIT 91032251 .745 DIA STUB SHAFT.

Ratings & Reviews

4.4

67 Reviews

Overall Assessment

The product, a steering wheel adapter, was highly praised for its quality which provided numerous options for adapting various steering wheels. Majority of our customers found the adapter compatible after slight modifications. Some customers used it successfully on Ford model vehicles and a 1937 Chevrolet. While some customers stated it did not readily fit certain early Ford models without machining, they mentioned the quality of the material made it a great base to start with for machining their adapters. A few customers shared their creative applications, including using the adapter on a custom boat and a 1955 VW bus steering column. The adapter was generally recommended for its practicality and good value, despite, in some cases, the need for additional bolts. The ability of the adapter to blend old and new parts was applauded, as was the easy installation process. Some customers voiced that improvements could be made to ensure the adapter fits universally, minimizing the need for modifications.

Write A Review

4.4

67 reviews

5

50

4

5

3

4

2

4

1

4

Most Liked Positive Review

5.0

From a Ford to a custom boat!

I bought this to adapt to a tiller rope and drum steering setup on a small boat I am building. The shaft on the steering shaft had a hole drilled in it on the tapered portion of the shaft (same taper as the hub). I measured for this hole carefully and transferred the location to the adapter hub which locates with a keyway and key. I drilled the hub to a number 7 and enlarged the hole in the shaft slightly to the number 7 drill bit, then tapped both holes to 1/4"-20. A 1/2" long setscrew locks them together. They fit perfectly and look as though they belong together! I added the Grant 570 steering wheel for the sprint car look with the horn button retainer and horn button and polished the aluminum mount for the steering shaft. Everything fit perfectly and all is shiny! Beautiful pieces and perfect fit.

Most Liked Negative Review

3.0

Nice piece, not a bolt on and go though.

Nice piece, but it came with no hardware, if I'm not mistaken, its a metric thread, which meant a trip to Ace Hardware to get three bolts, nothing I had in the garage would fit, ugh. THEN, the taper was off for my '31 Model A, had to take a 4" flapper disc to my steering shaft to remove quite a bit of taper in order to get it down far enough to get some threads showing to bolt on the wheel.

Filter by Ratings

I would buy this problem as needed

5.0

a month ago

Jungle Jim

Woodway,Texas

Verified

Able to update steering wheel on 41 Ford

Would Recommend

Old school 3 bolt steering wheel adapter

5.0

2 months ago

Chip

alabama

Verified

I've used these adapters for 50 years. Worked well on my 40 Ford. The whole kit was not available so i ordered the adapter and robbed another kit for the horn adapter.

Would Recommend

Perfect

5.0

5 months ago

Mongo

Camas,Wa.

Verified

I got this for my dad's '30 Ford roadster and he was tickled. Perfect for the '40 Ford column

Would Recommend

Steering shaft adapter

5.0

10 months ago

Phil

Minnesota

Verified

I used this to attach my steering wheel (Grant-type, 3-bolt pattern, 1.51" centers") to my 3/4" dia. steering shaft in my boat (was a forklift steering box). I sanded down the end of my steering shaft to fit the taper of this adapter hub and cut a grinded a keyway to match this adapter, then welded a 5/8 shaft and cut the threads to put a nut on, to press & hold everything on the tapered shaft. Some work involved, but this adapter made a great starting point.

Would Recommend

I would buy this again if needed.

5.0

a year ago

Humpy

Willits Ca.

Verified

This is exactly what i needed to replace the steering wheel in my old '35 Ford humpback.

Would Recommend

Yes again

5.0

a year ago

Charlie

Springfield Ohio

Verified

Works great I would buy again

Would Recommend

Good fit.

5.0

a year ago

Max

Milwaukee

Verified

Used for replacing splined steering wheel with tapered and keyed center

Would Recommend

I would buy again

5.0

2 years ago

Rat rod

Omaha ne

Verified

46 Ford rat rod

Would Recommend

I would

5.0

2 years ago

Geoff

Adirondacks, NY

Verified

Fit correctly. No adjustmentd needed.

Would Recommend

Exactly what was advertised and a perfect fit.

5.0

2 years ago

U turn

Delaware, Ohio

Verified

Fair price, quick delivery, and perfect fit. Can't ask for much more!

Would Recommend

Load More Reviews

Showing 10 of 67 reviews

Questions & Answers

6 Questions • 7 Answers

What size threads are the three bolt holes?

by Tom

• 3 years ago

1 answer

View Answer

Does this kit not require the use of the original nut that goes on the threaded end above the tapered shaft?

by 29roadSter

• 6 years ago

1 answer

View Answer

will this fit a 5/8 inch shaft that isn't tapered?

by moon

• 10 years ago

1 answer

View Answer

what size is the taper? I need a 3/4" keyed tapered hub. will this fit a helm steering unit with a 3/4 inch keyed taper shaft?

by puller

• 13 years ago

2 answers

View Answers

Can you tell me how many of these do you have in stock??

by Turbobug

• 15 years ago

1 answer

View Answer

If this adapter is used,is there any way to use the original horn wire or to install a horn button on the wheel,and does it leave much of a gap between the collum and the adapter?

by

• 15 years ago

1 answer

View Answer

6 of 6 questions shown

Fitment

                                    Customer Impersonation Script