Product Summary

Oldsmobile V8, AMC V8, Ford Small Block V8, Steel

  • 4340 heat treated steel
  • Features a longer slot to eliminate stud bind issues
  • Includes nuts and balls
  • 3/8" rocker stud
  • Non rail type to be used with pushrod guide plates

Key Specs

MFG. Part #57583201
Rocker Arm StyleRoller Tip
Rocker Arm Ratio1.6
Stud Size0.375"
Material TypeSteel

Need To Know

This Product Will Ship Free

Shipping Policies & FAQs

Quick and Easy Returns

Return Policy

Speedway Motors 57583201 Details

If your class or budget does not allow aluminum or stainless roller rocker arms, check out these rockers. Made from 4340 heat treated steel and feature a longer slot to eliminate stud bind issues. Includes 16 rocker arms, nuts and balls. 

Rockers accommodate a 5/16" pushrod.

Item Details

S/B Ford - 1.6 Ratio - 3/8" Stud

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

Speedway Motors 57583201 Specifications

KEY SPECS
MFG. Part #57583201
BrandSpeedway Motors
Rocker Arm StyleRoller Tip
Rocker Arm Ratio1.6
Stud Size0.375"
Material TypeSteel
GENERAL
Stud Diameter0.375"
Rocker Arm Nut StylePolylock
Sold in QuantitySet
NotesScre-in studs and guide plates required.
Self-AligningNo

Ratings & Reviews

4.2

10 Reviews

Customers say

Customers appreciate the product for its affordability and quality. Its steel partial roller rockers receive mention as a valuable economical upgrade. It functions well on E-Street heads with mild cams, exhibiting good durability even at a lower price point. However, there are notable installation observations; needs for guide plates, threaded studs, and the right pushrod length are crucial. Users also caution potential compatibility issues with Flo Tek heads. Despite these, most are still inclined to repurchase, showing satisfaction with its performance.