Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Chevy Billet Oil Filter Bypass Adapter

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Centerline of Holes:
2.357
Material Type:
Aluminum
Sold in Quantity:
Each
Finish:
Anodized
Base Diameter:
3.000
Notes
Non-bypass oil filter adapter will work with BBC or SBC. Forces 100% of engine oil to pass through the filter.
Chevy Billet Oil Filter Bypass Adapter
Chevy Billet Oil Filter Bypass Adapter

Click image to enlarge

Speeday Motors Logo
X
Chevy Billet Oil Filter Bypass Adapter

Details

Reviews

Q & A

What's in the Box

Trade that failure prone die cast piece with the internal bypass for this billet aluminum piece. The original bypass version allows unfiltered oil back into the engine at high pressure. These bolt right in and are much stronger.

  • Eliminates the failure-prone factory bypass 
  • Forces 100% of engine oil through the filter
  • Fits SBC and BBC engines ('68-up)
  • Can be used with stock type spin-on oil filters
  • Easy 2 bolt installation

You may also be interested in:

Hy-Lube Chevy Oil Filter Adapter
                        

Hy-Lube block adapter allows you to easily convert to a remote mount oil filter or plumb a dry sump. Replaces stock oil filter adaptor on S/B and B/B Chevys.

  • Raised outlet boss for better wrench access
  • CNC machined 6061 T6 aluminum 
  • AN 12 female threads (inlet & outlet)
  • Completely O-ring sealed
  • Designed for severe service use

 

AN Thread Sizing Guide (GIF)

Moroso 23845 Engine Save Pre-Filter Oil Filter Screen
                        

Stainless steel screen locates between the block and the oil filter to stop debris before it enters the filter element. Periodic inspections serve as early warning of engine failure. Fits S/B, B/B and 90° V-6 Chevy engines with spin-on oil filters. Does not affect oil pressure.

  • Unique stainless steel screen locates on top of spin-on oil filters to trap debris before it enters the filter element undetected
  • Particulate matter trapped in the screen and detected during periodic inspections serves as an "early warning signal" for impending engine failures
  • 304 stainless steel filtration-grade screen traps contaminants down to the 280 micron range without affecting oil flow or oil pressure
  • Crimped rings at both outside and inside diameters provide increased strength and extended durability
Oil Filter Adapter without Bypass
                        

Unlike an original OEM piece, this non-bypass adapter is designed to force 100% of the engine oil through the filter. It fits 1967 and newer small block and big block Chevys. The adapter includes one gasket and two 5/16-18 x 1" shocket head cap screws.

  • Replacement for stock oil filter to spin-on style oil filters
  • Designed to fit 1967 or newer small block and big block Chevy
  • Aluminum
  • Non-bypass adapter
  • Includes one gasket and two 5/16-18 x 1" shocket head cap screws

Note: As an alternative, our parts # 720-1029 or 720-1044 are remote filter mounts that will fit modern spin-on filters with 13/16”-16 threads (replacing your old canister-type filter).

OTR Racing RS48101-2 Short Oil Filter with Internal Magnet, Chevy
                        OTR Filters very own oil filters are the finest  spin on oil filters made in the motorsports world. Race engines are  expensive, protect your investment.

OTR oil filters have:
  • An internal magnet designed to attract fine steel particles too small to be trapped by the filter media!
  • Non stick gaskets made from a proprietary synthetic rubber compound.
  • Burst strength of 600 P.S.I.! OTR's spin on racing oil filters exceeds the ARP 1400 Standard by 5090, and they are made to handle the harshest conditions.
  • Ability to trap particles down to 30 micron or less!
  • Heaviest case and base plate in motorsports!
  • Met TCM bypass specification of 12-14 P.S.I., which reduces the risk of premature bypass that can result in unfiltered oil flowing to your engine.   
  • 1" nut welded on the bottom of the filter with 4 safety wire tabs allowing for secure attachment every 90 degrees. Nut is welded on so securely that the canister will distort before weld breaks. Base must break/tear before the nut will come off..
OTR Racing RS48102 Tall Oil Filter with Internal Magnet, Chevy
                        OTR Filters very own oil filters are the finest  spin on oil  filters made in the motorsports world. Race engines are  expensive,  protect your investment.

OTR oil filters have:
  • An internal magnet designed to attract fine steel particles too small to be trapped by the filter media!
  • Non stick gaskets made from a proprietary synthetic rubber compound.
  • Burst strength of 600 P.S.I.! OTR's spin on racing oil filters exceeds the ARP 1400 Standard by 5090, and they are made to handle the harshest conditions.
  • Ability to trap particles down to 30 micron or less!
  • Heaviest case and base plate in motorsports!
  • Met TCM bypass specification of 12-14 P.S.I., which reduces the risk of premature bypass that can result in unfiltered oil flowing to your engine.   
  • 1" nut welded on the bottom of the filter with 4 safety wire tabs allowing for secure attachment every 90 degrees. Nut is welded on so securely that the canister will distort before weld breaks. Base must break/tear before the nut will come off..