-9%
-9%
|
#91089525
7 Piece 45-Degree Double Flaring Tool, 3/16-1/2 Inch Mild Steel
- Deigned to easily and professionally double flare mild steel brake lines
- For 3/16", 1/4", 5/16", 3/8", 1/2" mild steel line only
- Tool makes 45° flares only and is not designed to bend stainless steel lines
$29.99
/each
In Stock
$32.99
Save $3.00
Quantity
Need Help? Call to Order
Add to a list
Product Summary
Hobby Stock, 45 degree Degree of Taper, Double Flare
- Deigned to easily and professionally double flare mild steel brake lines
- For 3/16", 1/4", 5/16", 3/8", 1/2" mild steel line only
- Tool makes 45° flares only and is not designed to bend stainless steel lines
Key Specs
| MFG. Part # | 91089525 |
| Degree of Taper | 45 degree |
| Bubble Flare | No |
| Double Flare | Yes |
| Single Flare | No |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91089525 Details
Speedway Motors 91089525 Details
Use this handy tool to double flare mild steel brake lines just like the brake shop does. This tool makes 45° flares only. For 3/16", 1/4", 5/16", 3/8", 1/2" mild steel line only, NOT to be used with stainless steel line. If using 37° AN fittings with stainless steel line, use 910-89524.
Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.
- 7 pc set includes flaring bar, yoke, and 5 double flare dies for tubing sizes: 3/16, 1/4, 5/16, 3/8 and 1/2" O.D.
- Easy to use lever lock flaring bar
- Floating cone for accurate alignment
- Detailed instructions
- Storage case keeps parts organized
Guides & Documents
Speedway Motors 91089525 Specifications
Speedway Motors 91089525 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91089525 |
| Brand | Speedway Motors |
| Degree of Taper | 45 degree |
| Bubble Flare | No |
| Double Flare | Yes |
| Single Flare | No |
| GENERAL | |
| Sold in Quantity | Set |
Ratings & Reviews
3.5
22 Reviews
Customers have remarked on the product's efficacy in brake line flaring, with many successfully completing projects. There were highlight notes on its cost-effectiveness and its ease of use for home-based tasks, including hobby building or smaller jobs. However, some customers noted that the product's material quality could be improved, such as in its adapters and flaring anvile. Issues with tool precision were also raised, as instances of tool damage or poor fitting led to imperfect flares. Despite its flaws, many customers were satisfied with the product's performance and would consider repurchasing or recommending it for similar tasks.
Ratings & Reviews
3.5
22 Reviews
Customers have remarked on the product's efficacy in brake line flaring, with many successfully completing projects. There were highlight notes on its cost-effectiveness and its ease of use for home-based tasks, including hobby building or smaller jobs. However, some customers noted that the product's material quality could be improved, such as in its adapters and flaring anvile. Issues with tool precision were also raised, as instances of tool damage or poor fitting led to imperfect flares. Despite its flaws, many customers were satisfied with the product's performance and would consider repurchasing or recommending it for similar tasks.
3.4
22 reviews
5
10
4
2
3
3
2
2
1
5
Most Liked Positive Review
5.0
This is a simple tool that makes the mos
I had to laugh at how easy it was to make this flare! The first "press" makes 2 45 degree flares and the second press rolls the top flare over the lower flare making a clean rolled surface to seal against. This tool worked great for me.
Most Liked Negative Review
2.0
Not for heavy use
This tool will do a few flares before slipping to the side. I cured this with a second one[...] by filing the inside feet flat taking out the casting marks then it worked very well and I think it will for quite some time. I was using the first one on a full new brake setup for my hot rod so it was a lot of flaring.
Filter by Ratings
45 degree flaring tool
5.0
5 months ago
Ace
Central Wisconsin
Verified
I have recently purchased this tool for my current project, I found out how easy it is to use andhow well it works, I needed one long before this, definitely a great tool!!
Would Recommend
Doesn't work at all.
1.0
4 years ago
Tiny
Southern Utah
This tool crushes the tubing if you get it tight enough to clamp the tube. Then the fittings won't slide to the end of the tube. I hoped it would at least make an acceptable double flare, nope. My friends Bluepoint works ten times better. I'm sadly disappointed.
Would Not Recommend
Poor quality
1.0
5 years ago
lu
Miami
Verified
Poor quality. Adapters are not hardened metal and not the right diameter. It damaged the brake lines. I borrowed the same tool of another brand and it worked right.
Would Not Recommend
I would buy it again needed to make double flare fittings
3.0
5 years ago
Ken
Pueblo Colorado
Verified
Works like it should
Would Recommend
I would buy again hope I don't need to
5.0
6 years ago
Tre
Sharon TN
Verified
First time flaring my own brake lines made it easy can't wait to do fuel lines
Would Recommend
Would buy again
5.0
7 years ago
Robbie Strange
Greenville SC
Verified
Worked well
Would Recommend
I would recomend this for the home hobby builder
5.0
7 years ago
27 t
Kansas
Verified
Did all my brake system on a 27 t roadster worked as tool was supposed to no issues and no leakes on any flares when complete
Would Recommend
Needs help
1.0
8 years ago
RDM
Texas
Verified
Outside of tubing gets scarred when making flare. Leaves nibs on outside of flares
Would Not Recommend
OK for home use. Did an entire brake system with it.
4.0
8 years ago
Neilski
Jamestown ND
Verified
Did the job
Would Recommend
Good tool, worked perfect
5.0
9 years ago
Tim
Iowa
Verified
Worked perfect, made sure lines were burr free and was just a dab of lube. Made perfect flares
Would Recommend
Showing 10 of 22 reviews