Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x
Our Email system is undergoing maintenance until 3 am CST, you may experience a delay receiving emails during this time.
Please check back with us at a later time to sign up for our email club or update your email preferences
We apologize for any inconvenience this may have caused and we appreciate your patience.

3rd Gen Hydraulic Round Tubing Bender & 1 Die Set

Free Shipping Free Shipping
3rd Gen Hydraulic Round Tubing Bender & 1 Die Set
3rd Gen Hydraulic Round Tubing Bender & 1 Die Set
VIDEO
3rd Gen Hydraulic Round Tubing Bender & 1 Die Set

Click image to enlarge

Watch the video below to learn more about the Speedway Motors Hydraulic Tubing Bender.

Details

Reviews (23)

Q & A (10)

What's in the Box

Info

Using advanced computer design methods and mass production, Speedway Motors brings you a superior tube bender at a better price. This eight ton hydraulic jack bends up to .134 mild or .096 chromoly round tubing. Tubing bender weighs less than 50 lbs and comes with one aluminum die, in the size of your choice.

Make a roll bar or roll cage like a pro, makes pipe bending easy -- you won't find a better bender anywhere! This rugged design will bend 1", 1-1/4", 1-1/2", 1-5/8" and 1-3/4" round tubing on a 7" radius.

  • Maximum bend is 90 degrees
  • Incremental marks cast into dies makes it easy to reproduce bends

910-84112 Instructions (PDF)

See the feature on this tube bender in Classic Trucks Magazine here.

Customer Reviews

Rated 4.3 out of 5 by 23 reviewers.
RATING BREAKDOWN
23 reviews
5 Stars
14
4 Stars
4
3 Stars
3
2 Stars
2
1 Star
0
RECOMMEND THIS PRODUCT:

dakonlikebacon
Verified Purchaser
Verified Reviewer
augusta, ks

good for the momey

April 21, 2016
I have bent a full cage and some sliders. All 1.75x.120 wall dom no issues other than jack pump seeping a little bit. For the price im impressed. I wish it had a better angle gauge but if you have an angle finder your good.
Pros:
  • Good Price
  • Clean Bends
  • Portable
Cons:
  • Cheap Jack
  • Angle Gauge Is Useless
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

quicklyfast
Verified Purchaser
Verified Reviewer
Hollister, CA

better bender

January 23, 2016
This was easy to set up and easy to use... bent 1.75 dia steel tube .120 thick with ease. Clamped it to a saw horse and had no problem with tipping
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Rclydew
Orlando,Fl

Worked good

October 12, 2015
Bent 1 5/8x.120 dom and erw mild steel tubing
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

bob380sx
Verified Purchaser
Las Vegas, NV, USA

this bender can be used anywhere!

March 23, 2015
I'm very happy with the bender. I got it to replace my old JD2 and its easier to set up and use plus it doesn't need to be mounted. you can literally sit this thing in the back of your truck and bent tube anywhere.
Pros:
  • bend anywhere
  • Great quality
  • great price$$$
  • east to keep dog leg out of hoops
Cons:
  • Only large radius dies
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

moneywaster
nj

poor

January 05, 2015
the jack leaks profusely after about 20 bends just doesn't work anymore . the die cracked after about 12 bends and was repaired only bending 1 5/8 120 wall tubing .poorly made Chinese product. makes a nice bend though a better instruction pack would be useful too maybe included bend radius lengths , and some simple formulas too
Cons:
  • poorly made
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

This customer was issued a new bottle jack at no charge. We apologize for any inconvenience this may have caused and are happy to help in any way that we can!
alal
Indiana, USA

good die set

November 26, 2014
the pump failed the first hour of use. a single o-ring pump, leaks and fails. I have replaced the o-ring several times so far. does make good bends - just needs a better pump
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

Speedway Motors Customer Service team has issued this customer a new bottle jack at no charge. We apologize for any inconvenience this may have caused, and are always happy to help in any way that we can!
Guyer7
Verified Purchaser
James Creek, PA 16657, USA

Great do it your self tool

January 04, 2014
Great tool for building your own racecar and other projects when you need tubing bent
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

JeepPox
AZ

Great bender

April 29, 2013
I have owned this bender for 3 years now and bought it used from someone who owned it for 2 years. I have used it to build 2 tube rock buggies, a cherokee cage and a wrangler cage. I have no issues with the way it works. I don't see how people break the dies using inferior material then me. I use 1 3/4" .120" wall DOM and my dies are all in perfect working condition. I replaced the ram with a air/hydro ram.
Pros:
  • Lightweight
  • Compact
  • doesn't need mounting
  • inexpensive dies
Cons:
  • dies can't bend much past 90*
  • no air ram from the factory
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

JeepPox
AZ

Great bender

April 29, 2013
I have owned this bender for 3 years now and bought it used from someone who owned it for 2 years. I have used it to build 2 tube rock buggies, a cherokee cage and a wrangler cage. I have no issues with the way it works. I don't see how people break the dies using inferior material then me. I use 1 3/4" .120" wall DOM and my dies are all in perfect working condition. I replaced the ram with a air/hydro ram.
Pros:
  • Lightweight
  • Compact
  • inexpensive dies
  • doesn't need mounting
Cons:
  • dies can't bend much past 90*
  • no air ram from the factory
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

dimondback sand cars
ohio

poor quality die

June 18, 2012
The first die cracked. It was replaced after I paid to ship it back, wait for it to be checked out, then pay for shipping new die. The second die cracked after third bend of 1.75 x .095 DOM tubing. I plated both sides of die with 3/8 plate after welding die (aluminum). It seems to be holding now. It also does not make 90 degree bends after tubing springback. The dies need to be redesigned to bend 120 degree bends and beefed up considerably. Could be easily done, should have been by third generation.
Pros:
  • Lightweight
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

Speedway Customer Service sent this customer a second replacement die at no cost to him to replace the one that broke. The first defective die was returned to us and sent to our QC department for inspection.
Page 1 of 3

Product Q&A

10 questions : 14 answers

2 answers

Will it bend 1 3/4 .134 tube into a 90* bend. Other brands say they can bend 1in into 90* but 1 3/4 only to 60*

Guywho
August 31, 2013

Will it bend 1 3/4 .134 tube into a 90* bend. Other brands say they can bend 1in into 90* but 1 3/4 only to 60*

Answers

July 18, 2014
biker
NO close but all you will get without a kink at the end is about 85,, they should have been made to 110 minimun.
September 03, 2013
Jason
According to our information on file the Speedway Motors tubing bender number 91084112 will bend 1” thru 1 ¾” in a 7” radius up to 90 degrees.
1 answers

can i get die's in 1 1/8" round tubing .

Dirtydog1
ohio
April 11, 2013

can i get die's in 1 1/8" round tubing .

Answers

April 11, 2013
Jason
Sorry, we only offer dies in 1", 1-1/4", 1-1/2", 1-5/8" and 1-3/4" for the 3rd generation tubing bender
2 answers

It states that the bender can do 1.75" in mild steel up to .134" wall thickness and .096" Chrome-moly. What about 1020 DOM tubing? Can it bend 1.75" OD 1020 DOM Round tubing?

January 12, 2012

It states that the bender can do 1.75" in mild steel up to .134" wall thickness and .096" Chrome-moly. What about 1020 DOM tubing? Can it bend 1.75" OD 1020 DOM Round tubing?

Answers

March 24, 2015
bob380sx
DOM is the process to make the tube not the type of metal. DOM tubing is still mild steel.
January 16, 2012
John
Part number 91084112 This tubing bender will work with DOM tubing up to the same wall thickness of .134.
2 answers

can tube dies be bought separetly

April 27, 2011

can tube dies be bought separetly

Answers

April 30, 2013
JeepPox
Yes they can search on the site. They run $149/ea
April 28, 2011
Tech Support
Please consider item # 91084113 and use the drop down box to select the size you wish to purchase.
1 answers

7" bend radius is measured to inside, center or outside of tube?

Ed
October 13, 2015

7" bend radius is measured to inside, center or outside of tube?

Answers

October 13, 2015
Eric
Expert
The bend radius is measured to the center line of the tube.
1 answers

I would like to purchase this bender/die, but I would like to use my air over hydraulic bottle jack... Can you please tell me the packaging dimensions of the space occupied by the manual jack? For example, how big L x W x H of a jack will fit inside bender's frame

Mhenry
January 04, 2016

I would like to purchase this bender/die, but I would like to use my air over hydraulic bottle jack... Can you please tell me the packaging dimensions of the space occupied by the manual jack? For example, how big L x W x H of a jack will fit inside bender's frame

Answers

January 08, 2016
Eric
Expert
The space for the jack measures 5 3/4" X 4 1/4" at the base and 9 1/4" tall.
1 answers

Will this bend 1.75 ERW round tubing with .095 wall thickness without kinking? Thanks

Mike
Modesto ca.
May 15, 2016

Will this bend 1.75 ERW round tubing with .095 wall thickness without kinking? Thanks

Answers

May 17, 2016
Zach
Expert
Yes this should produce a nice bend on tubing of that size
2 answers

Will this bender work on 1 1/2, .065, mild tubing?

Oly51
United States
June 22, 2016

Will this bender work on 1 1/2, .065, mild tubing?

Answers

July 19, 2016
oly51
Followed all the instructions including the oily newspaper tip and it kinked the 1 1/2 x .065 tubing when doing a 30* and a 60* bend.
June 22, 2016
Zach
Expert
Yes with the 1.5" die you can bend that tubing just fine
1 answers

just got the bender and bent a piece of 1.75 on a 90 and it wrinkled the pipe on the inside of the bend is there a way around this

tmt
concord nc
July 15, 2016

just got the bender and bent a piece of 1.75 on a 90 and it wrinkled the pipe on the inside of the bend is there a way around this

Answers

July 19, 2016
Charles
Expert
We apologize for the trouble you are having with the tubing bender. We ask that you please call us between 8am and 5pm, Monday through Friday, to speak with a representative from our Customer Service department regarding the tubing bender.
1 answers

Great bender but the Chinese jack only built one cage and patched a few bars and it has given up the ghost. leaks badly out of the jack pump mechanism. Is the Chinese replaceable. Boy how nice if there was a good old fashion made in the USA jack available. Even if it cost three times as much we would be racing for years with this bender. If jack replacement is available what part # and price please.

Daddy the money tree
Metcalf, GA
July 19, 2016

Great bender but the Chinese jack only built one cage and patched a few bars and it has given up the ghost. leaks badly out of the jack pump mechanism. Is the Chinese replaceable. Boy how nice if there was a good old fashion made in the USA jack available. Even if it cost three times as much we would be racing for years with this bender. If jack replacement is available what part # and price please.

Answers

July 22, 2016
Eric
Expert
We apologize about the issue with the jack. We do offer a replacement bottle jack which is part number 91084108. You could also use any other bottle jack with the same dimensions if you want to look for an upgrade for it.
Page 1 of 1

You may also be interested in:

  • Welders Handbook Welders Handbook
    View
    (0)
    $14.99
    Compare
  • Speedway Speedy Notcher Tubing Notcher Speedway Speedy Notcher Tubing Notcher
    View
    (22)
    $97.99
    Compare
  • 3rd Generation Hydraulic Round Tubing Bender & 5 Die Set 3rd Generation Hydraulic Round Tubing Bender & 5 Die Set
    View
    (8)
    $799.99
    Compare
  • 3rd Gen Individual Tube Bender Die Sets 3rd Gen Individual Tube Bender Die Sets
    View
    (7)
    $149.99
    Compare
  • PipeMaster P-T125 Contour Gauge for 1-1/4 Inch O.D. Tubing PipeMaster P-T125 Contour Gauge for 1-1/4 Inch O.D. Tubing
    View
    (0)
    $44.99
    Compare
  • Titan Tools 41265 Tekz Solar Powered Auto Darkening Welding Helmet Titan Tools 41265 Tekz Solar Powered Auto Darkening Welding Helmet
    View
    (1)
    $89.99
    Compare
  • Titan Tools 41266 Solar Powered Auto Darkening Welding Helmet, Flames Titan Tools 41266 Solar Powered Auto Darkening Welding Helmet, Flames
    View
    (1)
    $89.99
    Compare
  • Titan Tools 41267 Solar Powered Auto Darkening Welding Helmet Titan Tools 41267 Solar Powered Auto Darkening Welding Helmet
    View
    (1)
    $89.99
    Compare
  • Titan Tools 41185 90 Amp Gasless Wire Feed Welder Titan Tools 41185 90 Amp Gasless Wire Feed Welder
    View
    (0)
    $179.99
    Compare
Suggestions For You