1983 GMC G3500 Fasteners and Hardware Parts

There are several types of quarter-turn fasteners used in the performance automotive aftermarket and in this buyer's guide we'll help show you the correct fastener for your application and how some of the most common types of fasteners are used.

Speedway Motors employee Jess M. walks us through adding a little salt flat flair to her 1933 Ford coupe, by using moon discs and quarter turn fasteners.

See how to install 3" Ram Horn exhaust manifolds on a C/10 with a 406 engine. Learn some tips on welding steel tubing to a cast iron manifold and how they are modified to fit the truck.

Testing a 2 or 3 wire speed sensor sounds difficult, but these videos show that it actually is quite easy!

Learn how to swap out an LS engine with a modern fuel injected engine into a hot rod for added horsepower, fuel economy, or throttle response. View a list of parts and helpful tips to complete the installation.

In this budget build, a GM rear end is upgraded in order to hold 400+ HP. See how spherical bushings are replaced in a used 8.5” GM 10 bolt rear end.

In this Tech Tip, a returning customer asks for advice on wiring harnesses for his ’29 Ford roadster project.

Rebuilding an engine? Stay organized by using a valvetrain rocker arm organizer tray while disassembling the valvetrain components. Learn some tips on why you shouldn't mix up lifters if you intend on using them again.

Learn about the power behind the G-body platform and the steps to upgrade a 7.5" bolt rear end to a 8.5" to withstand high horsepower. See how to change the differential fluid and install new gaskets.

Hose & Fitting