Wheel and Tire Change Storage Kit

Secure Your Adjustable Jack Stands with Our Aluminum Storage Bin

A solid set of jack stands is a racer’s best friend in the pits. From tire changes to emergency repairs track side, getting your race car up in the air safely for you to work under it is imperative. Many racers rely on standard adjustable jack stands to get the job done because the adjustability of the jack stands provides for different height needs. The one issue post-race is finding the best jack stand placement to store them in your race trailer. We now have an in-house engineered solution that keeps your best jack stands safe and secure during transport.

Manufactured from .090-inch (1/16-inch) aluminum sheet that is laser cut, press bent to shape, and TIG welded for strength, the adjustable jack stand storage bin features the correct width and depth to store two or four of our standard adjustable 3-ton jack stands but will also work with most 2- and 4-ton models. Simply secure our jack stand storage bin to the base of your trailer wall using your preferred fastener (rivets, tapping screws, etc.) via the three 3/16-inch mounting holes. Fasteners are not included. Our jack stand storage bin keeps your best jack stands from banging into other tools or your race car during transport, and the wall height is sufficient for retaining the jack stands without further need for tie downs or bungee cords. A center divider is built right into the storage bin to keep a pair of stands in place when only one pair is being used. The 30-3/16-inch overall length works perfectly mounted before or after your trailer’s wheel houses and with just a 7-3/16-inch width you can easily mount one storage bin on each side of your trailer floor for best jack stand placement when stored without compromising the trailer floor’s surface area for strapping down your race car.

• Laser cut, press bent, and TIG welded from .090-inch thick aluminum sheet stock
• Designed to mount to trailer wall at floor to secure up to four adjustable jack stands
• Holds up to four standard jack stands, compatible with 2- to 4-ton models
• Secures via thee 3/16-inch mounting holes (fasteners not provided)
• Design matches other Speedway Motors trailer accessories
• Made in the USA right here at Speedway Motors

 

The Perfect Home for Your Speedway Motors Quick Change Racing Lug Wrench

Our Quick Change Racing Lug Wrench is an extremely popular wheel tool for our racing customers. Rightfully so, it handles 1-inch racing lug nuts with ease with its two-handed angled cross bar design and free spinning center handle. If there’s one concern with this tool it is certainly where and how to store it when not in use. Due to its length and design, it isn’t the most toolbox drawer friendly. If you have one of these great racing lug wrenches, or you’re considering picking one up for your racing program, well, we now have this ingenious little wrench holder available that will keep your quick change lug wrench at the ready.

Constructed from laser cut .125-inch (1/8-inch) aluminum, our Quick Change Racing Lug Wrench holder is the perfect answer to keeping your racing lug nut wrench safe and at the ready for when you need it. Whether it is pre-race setup at your pit trailer or changing your race car’s wheels and tires at home before heading out to your next event, your racing wheel lug wrench will be right where you need it without having to dig your racing lug nut wrench out from its normal hiding spot under your toolbox, hanging from the rafters, or wherever you’ve stashed it in the past.

Mounting our wrench holder is easy using the included 1/8-inch holes and suitable fasteners for the surface you’re attaching it to (trailer wall, shop wall, side of your toolbox, etc.). This means tapping screws or rivets for most installations. The design cradles the specific shape of our quick change wheel wrench and provides ample room for the main body of the lug wrench to hang freely. Your Quick Change Racing Lug Wrench will always be at the ready on the wall of your race trailer or the side of your pit box, or pretty much anywhere you decide to mount it! So, order one of our custom mounting brackets today and get your Quick Change Racing Lug Wrench off the floor and out of the way. For universal lug wrench styles, commonly referred to as a 4 way lug wrench, we offer a mounting bracket for this design as well.

• Laser cut and press bent from .125-inch thick aluminum
• Mounts via three pre-drilled 1/8-inch holes
• Attaches via tapping screws, bolts, or rivets (user provided)
• Mount to shop wall, trailer wall/cabinet, your toolbox, or rolling cart for quick access
• Fits Speedway Motors Quick Change Racing Lug Wrench tool only
• Made in the USA right here at Speedway Motors

Secure Your Floor Jack Quickly and Easily with Our Aluminum Jack Holder

A floor jack is a necessity come race day. From last minute repairs to swapping tires, having a solid floor jack that can take a beating is a must in your race trailer. Problem is that a good quality floor jack represents a decent bit of weight and the last thing you want is a floor jack rolling around unsecured in your trailer where it can damage your race car or the trailer itself. To prevent such damage and knowing what an investment a good floor jack is to your race program, we’ve designed this stout aluminum floor jack holder for your race car trailer.

Manufactured from 3/16-inch aluminum sheet that is laser cut and press bent to shape, the floor jack mount features a wheel cradle area for your floor jack’s front wheels that locks the floor jack into the floor jack mount. The floor jack holder pieces can be mounted at any width to accommodate varying jack widths, especially useful for jacks with side handles, via the pre-cut 3/8-inch mounting holes (mounting hardware not included). The two pieces of the trailer floor jack holder are not side specific and can be swapped side for side to hold your floor jack more securely depending upon the design of the floor jack and whether any side handles clear the holder. We engineered 3/4-inch retaining slots into both trailer floor jack holder pieces to provide an area where light-duty ratchet straps or other form of hold down can be attached to in order to secure your floor jack during transport.

• Laser cut and press bent from .190-inch (3/16-inch) thick aluminum sheet stock
• Designed to mount to your trailer floor to securely stow your floor jack when not in use
• Accommodates any standard aluminum or steel floor jack, with or without lift handles
• Fits up to 4-inch floor jack front wheels (not compatible with single roller style jack wheels)
• Dual retaining slots allow small ratchet straps or other methods to secure the jack
• Four 3/8-inch mounting holes for self-tapping hardware or through bolts (not included)
• Made in the USA right here at Speedway Motors