|
#912TLM11949
$9.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Steel, .750" Inside Diameter
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese steel outer bearing cones are replacement for our 1979-81 GM bearing and seal kit (910-31048). Fits tapered-bearing hubs. Works with stepped shaft spindles. If you have straight shaft, you will need two outer bearings.
IMCA Approved.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 912TLM11949 |
| Brand | Speedway Motors |
| Material Type | Steel |
| GENERAL | |
| Race Included | No |
| Sold in Quantity | Each |
| Notes | 14 ROLLERS, .254 DIA X .418 LENGTH. .652 THICK |
| Inside Diameter | .750" |
4.4
17 Reviews
Customers praised the product for its high quality, precise fit, and affordability. It was highlighted as an easy-to-upgrade component that significantly improved the performance of various car models. Users confirmed that the bearings worked exceptionally when fitted right. The product was recommended as a fitting replacement for ball bearings and proved effective after a simple application of grease. Some negative remarks about the fit on specific car models were addressed by the majority of users, satisfied with the product's adaptability and perfect fit for their vehicles. Overall, customers found it a worthwhile investment and would recommend it for its performance and quality.
4.4
17 reviews
5
12
4
3
3
0
2
1
1
1
Most Liked Positive Review
5.0
wheel bearing kit good. no tech support
your tech line could not supply tappered needle bearings only. If customer damages or looses needle bearings during installation, their only recourse is to purchase another COMPLETE king royal king pin kit. I took the less expensive and more timely solution......went to local auto parts, purchased king pin and bushing set, reamed and installed in my spindles, $150...ouch... please advise if needle bearings ONLY are available and their price. the loss of 2 needles was my bad, just looking for a more inexpensive solution. Thanks, Bob
Most Liked Negative Review
1.0
Didn't work for me
Using on a camaro street stock with the 10" speedway rotors with large studs, bearing didn't fit the spindle.
Filter by Ratings
Good fit
5.0
a year ago
Mick
Chicago
Verified
Had to sand spindle to get bearings to fit
Would Recommend
just what I needed
5.0
2 years ago
Doc
Morris county, NJ
Verified
great service, perfect fit
Would Recommend
Great quality for the price
5.0
3 years ago
JRod
Idaho
Verified
1965 GTO front hubs
Would Recommend
the parts fit just right with no problems.
5.0
4 years ago
marc
enfield ct
Verified
used the right way.
Would Recommend
Works good when they fit.
2.0
4 years ago
Dan
NorEast
Verified
Had to order 5 of these bearings to find 2 that would fit my spindles. (new speedway spindles)
Would Recommend
Perfect fit!
5.0
5 years ago
Dallas
Moose Jaw, saskatchewan
Verified
As always, just what I needed
Great service.
5.0
6 years ago
Kenny
Yukon, Ok
Verified
This was part of a kit that was purchased and was missing when received. Speedway shipped a replacement very quickly.
Would Recommend
Parts was exactly what I needed.
4.0
6 years ago
Willie
Moore, Oklahoma
Verified
I ordered this bearing for my 35 Plymouth that I didn't build. The tech line used what information I had of the front axle, and help me find the right bearings.
Would Recommend
street rod project/ front end bearings
5.0
6 years ago
garys 40 priject
North Fork Ca
Verified
very easy to upgrade
Would Recommend
I would buy this product again.... and would recommend it
5.0
9 years ago
Joe
Redlands ca
Verified
Great service agents too
Would Recommend
Showing 10 of 17 reviews
2 Questions • 2 Answers
Is this bearing supposed to be used with the race that comes with the outer bearing (912TS3) in the 910-31048 kit?
by 54x
• 7 years ago
1 answer
View Answer
Size Outer & inner size?
by Bobs33
• 13 years ago
1 answer
View Answer
2 of 2 questions shown
