|
#91631944
$141.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
1923 Model T, Steel, Natural
Need help?
855.313.9176Quick and Easy Returns
Return PolicyUniversal brake pedal mount and pedal arm assembly. This kit is designed to work with a Speedway Motors T-body with floor. Modifications may be needed to fit your assembly.
Works well with our Dual Feed Master Cylinder 910-31420 and 3/8" Clevis 916-31949 (sold separately).
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91631944 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Natural |
| GENERAL | |
| Sold in Quantity | Kit |
| Notes | Distance from the pivot point to the hole center where the pedal pad mounts is 11.50". Distance from the pivot center to the center of the hole where the pushrod mounts is 2.00". |
4.8
8 Reviews
Customers favor our product for its excellent quality, sturdiness, and practicality. It stands out for facilitating optimal pedal clearance and is deemed superior to expectations. The construction quality underpins its durable nature, while some users suggest an enhancement in mounting provisions. Repeated purchases emphasize users’ trust in our item's consistent performance and quality. Compared to competitors, our product has delivered notable customer satisfaction.
4.8
8 reviews
5
6
4
2
3
0
2
0
1
0
Filter by Ratings
If needed
5.0
5 months ago
Speed
Illinois
Verified
It works
Would Recommend
I would buy this product again
4.0
a year ago
Homer
Shepherdsville Ky
Verified
The one bolt that came with the product was to short fit installation i had to buy a longer bolt plus a second bolt to finish the assembly
Would Recommend
Thick steel, well built and universal application.
5.0
2 years ago
FBG
Phoenix
Verified
Used this on a custom built chassis made from .120 wall 2x4 tubing. Worked well by fabricating a bracket for it to install a few 1/2" bolts. Has good travel and the correct angle. Ended up torching and bending 2 90 degree dog legs into it to go around my steering column, but the steel was thick and sturdy.
Would Recommend
Well made.
4.0
5 years ago
Kevin
Conway Ar
Verified
Mounting provisions on the bracket could be better.
I've used these before
5.0
6 years ago
Sam
Dearborn,mi
Verified
This was a easy way to get the pedal clearance I needed
Would Recommend
Well made sturdy pedal
5.0
7 years ago
Motorhead
Orange City, Florida
Verified
Haven't installed yet, need to fabricate mount
Would Recommend
excellent quality!
5.0
7 years ago
patman
Kansas City
Verified
Better than i thought it would be!
Would Recommend
good stuff.
5.0
11 years ago
chuck
loveland, co
Verified
every thing I have bought from Speedway has been good quality and delivered on time.
Showing 8 of 8 reviews
6 Questions • 6 Answers
Looking for the brass bushing that goes in this pedal assembly. Mine has gotten sloppy over the years. Is there a part number for the bushing?
by Jrod
• 7 years ago
1 answer
View Answer
Is the 916-31944 the same assembly used in the 916-23271 kit?
by Tom
• 8 years ago
1 answer
View Answer
Can you please tell me the length of the arm, from the pivot point to the top where the foot pedal pad will mount? And the length of the bottom arm from pivot point to where the clevis attaches to?
by Joe
• 10 years ago
1 answer
View Answer
Can you please tell me what the pedal ratio is
by Pistonbroke
• 11 years ago
1 answer
View Answer
how far off the inside of frame rail does pedal arm set. also how far does this set the master cylinder from the insde of frame
by Abbegale
• 13 years ago
1 answer
View Answer
is the pivot bolt designed to be bolted straight through the frame rail?
by Bob
• 14 years ago
1 answer
View Answer
6 of 6 questions shown
1923 Ford Model T
