|
#92550740
$20.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 3.00" Overall Diameter, Steel, Chrome
| MFG. Part # | 92550740 |
| Brand | Speedway Motors |
| Overall Diameter | 3.00" |
| Material Type | Steel |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 92550740 |
| Brand | Speedway Motors |
| Overall Diameter | 3.00" |
| Material Type | Steel |
| GENERAL | |
| Overall Thickness | .50" |
| Finish | Chrome |
| Notes | Fits over 1/8" or thinner door edge. |
| Sold in Quantity | Each |
4.7
40 Reviews
Customers appreciate the product's quality, value for money, and nice appearance. They commend the product for its suitability and great fit to different car models including classic ones like 65 Chevy, 1950 Ford f1, 32 Ford, and 55 Chevy. The product's installation can be challenging for some, but most customers praised its easy installation and modified mounting capabilities. However, some customers recommend purchasing larger sized mirrors and ensuring channels can accommodate the mirrors. They also advised on the functionality of adjusting the mirror's angle for better viewing. Despite these, customers would still re-purchase the product if necessary due to its great usefulness and contribution to a car's streamlined body.
4.7
40 reviews
5
32
4
4
3
4
2
0
1
0
Most Liked Positive Review
5.0
Very nice product
I have a 1934 ford three window coupe that has a 3 inch chop it was a bit difficult to see do to a blind spot. These mirrors fit nicly,look great with my car and were very easy to install . These items were also reasonably priced. I'm very pleased with these mirrors and would purschase another set if needed them for another project. Thanks again for a good quality product, along with very quick delivery .
Most Liked Negative Review
3.0
mirror angle
it seems after I mount the mirrors on the door edge of my 48 chevy pickup, the mirrors do not angle enough in so I can adjust them correctly, especially the passenger side mirror. The angle on the arm is too far out once the mirrors are mounted to the doors How can I adjust the angle of the arm to be able to then adjust the mirror in to see ?
Filter by Ratings
Car looks good
5.0
23 days ago
Debo
Fayetteville NC
Verified
Works good on car looks good also.
Would Recommend
A great addition to my Cobra (which had limited rear vision)
5.0
7 months ago
Scooby Doo
Raleigh, NC
Verified
Installed left and right hand sides. East installation.
Would Recommend
I will buy this again need one for the other side
5.0
9 months ago
Mr C
Wi
Verified
Works good, nice chrome clean classic look
Would Recommend
I would buy this product again
5.0
a year ago
Ted
St. Mary's Georgia
Verified
Nice chrome finish will work great for what I need it for. Thank you.
Would Recommend
As advertised
5.0
a year ago
BobL1360
Fort Smith, AR
Verified
Was able to mount to my 27T windshield post.
Would Recommend
Nice piece for a hotrod
5.0
a year ago
John
Gilbert AZ
Verified
Bought these mirrors for my 34 coupe, perfect addition to help make it a little safer to drive.
Would Recommend
Love them
3.0
a year ago
Pop
Arkansas
Verified
I shaved the factory mirrors on my 1964 c10 and put these on. Easy to install and look amazing.
Would Recommend
I would buy again
5.0
a year ago
Mr C
Chippewa Wi
Verified
Clean look and adds a touch of chrome
Would Recommend
I would buy again if I needed another one
5.0
2 years ago
Jim
New Haven CT
Verified
Clamp-on mirror installed easily on the TR3 and looks great, as if it was original!
Would Recommend
No
5.0
3 years ago
Fearless
Oakwood, GA
Verified
Love the style. Will fit style of '65 Chevy pickup very well. I will comment further after I have installed them. Appreciate your.
Would Not Recommend
Showing 10 of 40 reviews
3 Questions • 3 Answers
I have drilled holes in the fiberglass body of my car that now secure my 3 " peep mirrors . Can these mirrors fasten the same way to the existing holes? The base of my mirror arm's that touch the car body is 3/4 of an inch .
by John
• 10 years ago
1 answer
View Answer
I have a 2003 Kilborne 32 ford highboy coupe. Bought a pair of peep mirrors from summit before I knew of your web site. The gap of the brackets was not wide enough for the front top edge of the doors. Would like to know if your chrome 3 in peep mirrors fit Kilborne body doors ?
by Buck
• 14 years ago
1 answer
View Answer
What is the half round clear plastic piece that comes with the mirror for?
by
• 15 years ago
1 answer
View Answer
3 of 3 questions shown
