|
#91049800
Universal Bolt-On Panhard Track Bars for Ford 8/9-Inch Rear Axles
- Bolt-on axle bracket for 8" or 9" Ford rear end
- Mounts to pinion bearing support
- Positions track bar 2" above pinion bearing support
Starting from
$135.99
/set
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
- Bolt-on axle bracket for 8" or 9" Ford rear end
- Mounts to pinion bearing support
- Positions track bar 2" above pinion bearing support
- 20" eye-to-eye
- 19-3/4" to 20-1/2" adjustment range
Key Specs
| MFG. Part # | Select Finish |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
| Finish | Select Finish |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDetails
Details
This Ford 8"/9" rear end Panhard bar is used to control the side-to-side movement of the rear axle underneath the chassis. This is necessary when using a parallel 4-bar or hairpin radius rod style rear suspension. The track bar is threaded on one end for length adjustment and is welded on the opposite end. This will require one end to be unbolted to allow for the length adjustment. The assembly can be adjusted from 19-3/4" to 20-1/2" long.
Available in stainless steel with a plain or polished finish.
Kit includes:
- Bolt-on axle bracket for 8" or 9" Ford rear end
- Mounts to pinion bearing support
- Positions track bar 2" above pinion bearing support
- Bar is 3/4" O.D. with singe urethane-bushed stainless adjuster
- 20" eye-to-eye
- 19-3/4" to 20-1/2" adjustment range
- Frame bracket
Guides & Documents
Specifications
Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Finish to see |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
| Finish | Select Finish to see |
| GENERAL | |
| Tube O.D. | .75" |
| Sold in Quantity | Set |
Ratings & Reviews
4.7
51 Reviews
Customers appreciate our product for its high-quality, polished finish and durability. With several comments noting a good fit on various car models, customers confirm the product's versatility. Despite the need for some minor adjustments and welding for installation, it's deemed easy to install, even by at-home users. Many praised its practicality with components like its adjustable nature and longevity being appreciated. Users also commend the improved vehicle performance and stability after installation - a feature that distinguishes our product from others. Some negative remarks about incorrect sizing were made but users were generally willing to adjust the product themselves, suggesting strong overall satisfaction. Numerous customers would continue using this product in future builds, testifying to its reliability and effectiveness.
Ratings & Reviews
4.7
51 Reviews
Customers appreciate our product for its high-quality, polished finish and durability. With several comments noting a good fit on various car models, customers confirm the product's versatility. Despite the need for some minor adjustments and welding for installation, it's deemed easy to install, even by at-home users. Many praised its practicality with components like its adjustable nature and longevity being appreciated. Users also commend the improved vehicle performance and stability after installation - a feature that distinguishes our product from others. Some negative remarks about incorrect sizing were made but users were generally willing to adjust the product themselves, suggesting strong overall satisfaction. Numerous customers would continue using this product in future builds, testifying to its reliability and effectiveness.
4.7
51 reviews
5
42
4
5
3
2
2
2
1
0
Most Liked Positive Review
5.0
Panhard bar
Modified to fit the Chevy 10-bolt on my '29 Ford. No major challenges just drilled additional hole and bolted it on. Only have about 500 miles on it to date but I expect it will last a very long time. This solves a lot of problems for those building a hot rod with just hand tools.. no welding required.
Most Liked Negative Review
2.0
I would not buy this product again.
It is advertised as a bolt system, however, the bar was to long and I not only had to cut it shorter I also had to tap it deeper so there would be threads deep enough for the eye bolt. It was inconvenient but I do understand it is on a hot rod and may need to be altered. I would recommend this part. I would recommend a company that can make it to the correct size needed.
Filter by Ratings
I would buy this again
5.0
12 days ago
CS
Floresville Tx
Verified
Looks like good quality, haven't installed yet
Would Recommend
Yes I would buy again
5.0
a month ago
No nickname
Tacoma Wa.
Verified
I like the idea of the bracket. That bolts to the rear end
Yes I would buy again
5.0
a month ago
No nickname
Tacoma Wa.
Verified
I like the idea of the bracket. That bolts to the rear end
As described
5.0
5 months ago
SCHMEEL
CC. IN
Verified
Works as should
Would Recommend
Yes , I would buy again if needed
5.0
a year ago
Ally op
Canada
Haven't put it on yet
Stable
5.0
a year ago
Robert
Napa, Ca
Verified
I used this product on a 1953 Dodge truck with a 9" Ford rearend that I am currently working on and it was the best answer for a 4 bar rear suspension
Would Recommend
yes
5.0
a year ago
Steve
New Zealand
very happy
Would Recommend
I would buy this product again
5.0
2 years ago
Bob
Granger, Iowa
Was an easy install on rear end with manual welding on frame. Quality construction. and very nice finish
Would Recommend
The panhard I bought worked just fine on my 39 Ford Pickup.
5.0
3 years ago
Bob
Granger, Iowa
Verified
The bar was highly polished and of good quality. Shipping was very quick and packaged well. Would buy this bar again
Would Recommend
I would buy this product again.
5.0
3 years ago
Jarhead
Sparks nv
Verified
Installed as per directions.
Would Recommend
Showing 10 of 51 reviews
Questions & Answers
12 Questions • 10 Answers
Questions & Answers
12 Questions • 10 Answers
Do you sell just the mount? I need to use a J bar with mine. Do you offer it with a J bar or sell just the mount?
by Paul
• 2 years ago
1 answer
View Answer
Do the frame side have to be welded to the frame
by Big Ferg
• 7 years ago
1 answer
View Answer
Is the pinion bracket reversible so as to allow use of left or right frame rail?
by boss
• 8 years ago
1 answer
View Answer
Will this fit the ford 9 3/8 carrier?
by None
• 9 years ago
1 answer
View Answer
How deep has the bar been threaded on each side? Assuming it's 20" eye to eye at it's shortest, I'd like to shorten it further. (17.5", without having to cut additional threads)
by DW
• 10 years ago
1 answer
View Answer
I put one of these panhard bars on my car a few years ago and I noticed that the bushings have deteriorated. the bushing in the end that welds to frame is completely gone. do you sell replacement bushings thank you
by Franko
• 10 years ago
1 answer
View Answer
This is compatible with the ford 8.8 differential?
by montanti
• 10 years ago
1 answer
View Answer
Will this work with a 2 link system on a airbagged 2000 S-10
by Zoom
• 10 years ago
1 answer
View Answer
Will this panhard bar fit chassis #91657045?
by big D from the 'couve
• 11 years ago
1 answer
View Answer
Distance of pivot above axle centerline? How high above the axle centerline (or mounting hole if easier) is the pivot for the bar end? Pretty important to know if the bar is to be parallel to the axle at ride height.
by MWilson
• 13 years ago
1 answer
View Answer
10 of 12 questions shown