Universal 3/16 PVF Coated Steel Brake Line Install Kit, 3/8-24

Speedway makes plumbing brake lines easy with this steel brake line kit that includes new lines and fittings to make your job less stressful.

Kit Includes:

• (1) 25 Ft. Roll of Speedway 3/16 Inch PVF Coated Steel Brake Line
• (2) Bags of 5 Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24

Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Speedway 3/16 Inch PVF Coated Steel Brake Line

Now available for your 3/16" brake line consideration is a new PVF Poly-Armour Poly-Vinyl Fluorine coated brake line. 

• PVF coating is a highly durable 'plastic' coating that is 'baked and cured' to the line for a durable finish that provides a clean look and appearance with a dark olive green color
• This provides extra protection from corrosion, debris, and road surfacing solutions
• Also offers superior bend-ability without kinking and bends easier than standard brake line tubing
• This makes Poly-Armour the easiest line to work with-period!
• Underneath the PVF coating is a double-wall, low carbon steel, copper brazed tubing which meets all international and U.S. requirements for brake tubing
• Considered a premium line, Poly-Armour hard line should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel etc.
• PVF Poly-Armour coated line is the perfect choice for the racer for those weekend after race chassis washes week after week or any street rod fabricator wanting to utilize a hard line application for that beautiful finish that will last for years
• Available in a 25' roll of 3/16" line
• This line bends easily and smoothly with hand tools and can be flared with a 37° AN flaring tool, or 45° double flaring tool
• Use in conjunction with our 3/8"-24 inverted flare male brake line nuts, or AN tube nuts and sleeves

Inverted Flare Thread Nuts for 3/16 Inch Tubing

• Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°

Used in conjunction with Inverted Flare Fittings,  Pipe To Inverted Flare Fittings, and -AN to Inverted Flare Fittings.

Brake System Builder's Tip (Link)