|
#18590062
UMI 90062 Rear Spring Spacer 1/8 Inch Thick, ID 2-7/8, OD 3-3/4
$9.99
/set
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
|
#18590062
$9.99
/set
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Need help?
855.313.9176Quick and Easy Returns
Return PolicyUMI’s rear spring spacers may be just the ticket to achieve that perfect stance or prevent tire rub. UMI’s zinc coated, laser cut mild steel spacers are available in 1/8” and 3/16” thickness and can be safely stacked. They provide an easy way to fine tune the rear ride height of your GM A, G and F-Body. No cutting, welding or drilling required. We recommend these for fine-tuning only, and maximum adjustment amount is the responsibility of the installer. Normal installation position is on the upper perch although lower perches may have adequate height (F-Body lower perch only). 100% manufactured, tested and raced out of Philipsburg, PA – USA. P/N 0062 is for one 1/8” spacer.
Note: Spacers may work on other vehicle models. Please use the measurements to verify fitment. OD= 3-3/4” ID= 2-7/8”
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 90062 |
| Brand | UMI Performance |
| GENERAL | |
| Outside Diameter | 3.75" |
| Inside Diameter | 2.875" |
| Finish | Zinc |
| Sold in Quantity | Set |
| Material Type | Steel |
| Overall Thickness | 0.125" |
Be the first to ask a question.