UMI 230910-B 93-02 F-Body Front Adj. A-Arm Kit, Road Race, Black

UMI’s heavy duty boxed arm kit with adjustable rod ends provides a rock-solid foundation for your autocross, road race or corner carving 4th Gen. The lower a-arms fully gusseted box tubing construction, while appearing heavy-duty, affords a five pound weight savings per set over factory lower a-arms. These arms have double shear sway bar mount tabs with endlink set included as well as factory GM pedestal location. Lower arms are compatible with factory, Koni, and other t-bar, stock mount shocks. Upper arms feature caster and camber adjustment with premium rod ends. Laser cut ball joint pads feature improved ball joint angle and increased caster (up to additional 2 degrees-varies by chassis) for lowered cars and come assembled with premium ball joints. UMI’s newest design features the most travel and clearance of any a-arm on the market and is a must for lowered vehicles. This A-arm kit is designed to work with the factory K-member, UMI k-members, and virtually all stock mounting point aftermarket K-members. Crafted with pride in Philipsburg, PA - USA.

Hardware kit P/N 2303-A-arm hardware kit includes Grade 10.9 bolts, washers and Ny-lock nuts. Kit includes everything needed to mount your new UMI a-arms to the vehicle.

Features:

• 0.120” wall mild steel box tubing lower

• 5 lb weight savings per kit

• Double shear sway bar mount with endlink set included

• Pedestal mount fits DeCarbon, Koni, Bilstein and aftermarket GM t-bar

• Double gusset design for flex-free operation

• Race quality high misalignment rod end on vertical mount

• Nominal 2 degrees additional caster built-in

• Teflon lined, high load capacity race rod ends= less suspension friction.

• Adjustment allows additional caster and camber to be achieved.

• Uses balance of OEM hardware or use new UMI hardware kit.

• Premium ball joints installed

• Durable red or black powder coat.

• Made in Philipsburg, PA – USA

Installation Instructions (PDF)

Installation Instructions (PDF)