UMI 2062-B 82-02 F-Body Competition Panhard Bar Kit, Black
Adjustable, Powder Coated, Black, Steel
UMI’s 3rd and 4th Generation GM F-Body competition panhard bar lowering and leveling kit is designed to increase over-the-axle exhaust pipe clearance and also lower and level the Panhard bar. This competition proven setup includes a weld-in reinforcement plate for the factory panhard bar mount as well as an adjustable strut to prevent lateral movement of the bracket system. Laser cut adjustment slots permit lowering and leveling the PHB for roll center height and performance tuning. This kit gives much of the performance of a Watts Link with easier installation and adjustment and at a lower price point. Available in UMI red or gloss black powder coat. 100% designed, manufactured and raced with pride in the USA.
Installation Notes: UMI's panhard bar lowering and leveling kit requires at least 1.5 inches between the sway bar and axle tube. This distance can be achieved by using UMI's P/N 2244-275 sway bar bracket kit or equivalent. Please check clearance before purchasing, see image below for additional clarification. Panhard bar lowering and leveling kit must be used with an adjustable panhard bar.
- For use with factory axle only.
- Lowers rear roll center height 1-3/4” to 4” in 7/16” increments.
- 100% bolt-in for street use. Welding required for competition use.
- Upper panhard bar brace built using 1.250" USA DOM tubing.
- CNC Laser cut bracketry throughout.
- Exclusive weld-in reinforcement plate (required for competition use).
- Adjustable panhard bar height and leveling.
- Upper panhard bar brace available powder coated UMI Red or Gloss Black.
Factory location is “too high” for performance use.
Lowering the panhard bar prevents mid-corner oversteer.
Raising the panhard bar enhances mid-corner rotation.
- This item ships directly from the manufacturer. It may take an additional 10 business days for UMI Performance to ship this item.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
More Like This
UMI 2062-R 82-02 F-Body Competition Panhard Bar Kit, Red
RideTech 11449099 Bolt-On Panhard Bar Kit, 88-00 C3500
AFCO 20147-3 1993-02 GM F-Body Lower Shock Tie Bar Kit
RideTech 13009099 Bolt-On Panhard Bar Kit, 94-02 Dodge 1 Ton
UMI 2628-B 70-81 F-Body Leaf Spring Traction Bar Kit, Black
UMI 2628-R 70-81 F-Body Leaf Spring Traction Bar Kit, Red
RideTech 12229099 Bolt-On Panhard Bar Kit, 99-04 F350
RideTech 41583000 Seat Belt Harness Bar Kit, 97-04 Corvette
RideTech 11439099 Bolt-On Panhard Bar Kit, 73-91 C30
RideTech 11459099 Bolt-On Panhard Bar Kit, 01-06 C3500
Q & A
Check out our 6th episode of the 410 Sprint Car Build series. Last time we assembled the rear axle and now we are installing it!
Learn about the importance of getting the chain tension set correctly, and why it is critical that we get it as near perfect as we can. Walkthrough a basic procedure that effectively and consistently gets the chain tension set properly every time.
Do you need a Panhard Bar on your front suspension? Find out whether its recommended to have one on your four-bar or cross steering system.
Jacobs Ladder Layout for a Sprint Car.
This article demonstrates how to install a complete Winters quick change kit with additional parts including birdcages, brackets, and calipers for a modified race car.
Learn about the steps and tools necessary for a smooth chassis assembly for your sprint car.