|
#91021957
Transmission Shifter Shift Lever Linkage Rods
- These aluminum rods work well for shifters or throttle linkage
- 3/8"-24 RH threads in one end and LH threads in the other allow for length adjustment of the assembly by spinning the rod
- Anodized purple for a durable shine
Starting from
$16.49
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
- These aluminum rods work well for shifters or throttle linkage
- 3/8"-24 RH threads in one end and LH threads in the other allow for length adjustment of the assembly by spinning the rod
- Anodized purple for a durable shine
- Use along with 3/8" rod ends or clevis to complete the assembly
- Choose from 16", 20", 24", 30", or 36" lengths
Key Specs
| MFG. Part # | Select Length |
| Brand | Speedway Motors |
| Material Type | Aluminum |
| Finish | Anodized |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDetails
Details
Replacement aluminum rod for shifters. Available lengths: 16", 20", 24", 30", and 36". Threaded RH and LH.
Heims sold separately.
Specifications
Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Length to see |
| Brand | Speedway Motors |
| Material Type | Aluminum |
| Finish | Anodized |
| GENERAL | |
| Overall Length | Select Length to see |
| Overall Diameter | .50" |
| Thread Pitch | 3/8"-24 LH; 3/8"-24 RH |
| Color | Purple |
| Adjustable Rod Ends Included | No |
| Sold in Quantity | Each |
Ratings & Reviews
4.9
24 Reviews
Customers are highly satisfied with our product's top-notch quality, practicality, and features. They appreciate its applicability for shifter rods and tie rods in vehicles and go-karts. Despite its thin-wall construction, users note that it bends easily which protects spindles and wheels during racing. It's also easy to adapt, with customers able to rethread one end to fit specific needs or cut for exact length. Some users had to make slight modifications; however, they still rate the product highly. They laud the clean look provided by the anodizing and highlight its strength and solidity, confirming its great performance in challenging conditions, such as in demo derby transmissions.
Ratings & Reviews
4.9
24 Reviews
Customers are highly satisfied with our product's top-notch quality, practicality, and features. They appreciate its applicability for shifter rods and tie rods in vehicles and go-karts. Despite its thin-wall construction, users note that it bends easily which protects spindles and wheels during racing. It's also easy to adapt, with customers able to rethread one end to fit specific needs or cut for exact length. Some users had to make slight modifications; however, they still rate the product highly. They laud the clean look provided by the anodizing and highlight its strength and solidity, confirming its great performance in challenging conditions, such as in demo derby transmissions.
4.9
24 reviews
5
22
4
1
3
1
2
0
1
0
Most Liked Positive Review
5.0
Works well.
I have used this on my TH400 demo derby transmission. I got a new one after bending the one I had last year. The old one still worked, but was causing the shifter to catch some. It bent because the hole I had cut for it was not big enough and part of the body/floor got pushed into it.
Most Liked Negative Review
3.0
good Quality and finish
I had to shorten slightly but was concerned about a small groove about 2 inches from one end that was cast or machined around rod as being a weak point. Groove was coated over so it was in there before finish was applied
Filter by Ratings
I would buy this product again
5.0
2 years ago
racing3d
Upton Wyoming
Verified
Great quality and very sturdy and well constructed. Isn't flimsy or much flex in rod.
Would Recommend
I would recommend this product
5.0
3 years ago
Ram rod
Sigel pa
Verified
Worked great on dirt latemodel
Would Recommend
Linkage rod
5.0
4 years ago
hot rod
Augusta, Ga
Verified
shifter linkage
Would Recommend
Great Shifter Linkage
5.0
5 years ago
JD Nova
Minneapolis MN
Verified
Used these with hymn joints to make shifter linkage for old school Vertical Gate shifter. Also clutch linkage.
Yes
5.0
5 years ago
Hot Rods 34
Bay Area Ca.
Verified
Special linkage!
Would Recommend
Love the product and the color
4.0
5 years ago
Pete Scooter Van Noordt
Glenwood, New Jersey
Verified
Product is great for shifter rods but even better for making tie rods on go karts. Thin wall construction bends easy, thus saving spindles and wheels during contact while racing.
Would Recommend
Worked great
5.0
5 years ago
Pa
Eaton Rapids Mich
Verified
Just re threaded one end and worked GREAT.
Would Recommend
Very happy with product, in stock and rapid delivery. I can
5.0
5 years ago
Pete Scooter Van Noordt
Glenwood, NJ
Verified
I use the product as an intended shift rod, as well as tie rods for my sons go kart
Would Recommend
Great Product. Highly recommended
5.0
6 years ago
JT
Ethel,MS
Verified
Very quick way to make shifter linkages.
Would Recommend
I would buy this again
5.0
6 years ago
Gary
Holliday tx
Verified
Worked great
Showing 10 of 24 reviews
Questions & Answers
Questions & Answers
7 Questions • 7 Answers
How will these hold up on a severe duty drag car
by rich
• 7 years ago
1 answer
View Answer
Hi is it possible to bend the rods safely
by Brett
• 8 years ago
1 answer
View Answer
When cutting these to desired length. Can you use a 3/8 tap for threads? Or will you have to go bigger?
by CHUCKLES
• 8 years ago
1 answer
View Answer
Is the shifter rod hollow all the way so it can be cut and tapped?
by Ben
• 9 years ago
1 answer
View Answer
do these use a 1/4 in heim?
by engineer
• 10 years ago
1 answer
View Answer
are the threads deep enoungh to cut these rods to specific lengths? i need one at 18" eye to eye and another at 21 1/4" eye to eye.
by roger
• 14 years ago
1 answer
View Answer
How deep are these shifter rods threaded on each end?
by
• 15 years ago
1 answer
View Answer
7 of 7 questions shown