|
#5503410
$9.49
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Steel, Zinc Plated
Need help?
855.313.9176Quick and Easy Returns
Return PolicyPositive stop to locate top dead center. A must for cam checking with heads on. For 14 mm plug thread. Stop bolt thread 3/8"-16
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 5503410 |
| Brand | Speedway Motors |
| Material Type | Steel |
| GENERAL | |
| Finish | Zinc Plated |
| Sold in Quantity | Each |
| Notes | Adjustable length from 0 to 1.45" |
4.4
17 Reviews
Product is generally recommended by customers for its useful function in finding true TDC, facilitating camshaft degreeing, and setting up a degree wheel. Users described it as a "must-have" for engine builders, functioning well despite the low pricing. Critiques include a lack of a jam nut and oversized hex, requiring some user modifications. Some also noted potential piston damage from the threaded portion and suggested the inclusion of a non-threaded section. Despite these aspects, overall consensus states the product's usefulness and value outweigh potential flaws.
4.4
17 reviews
5
10
4
3
3
4
2
0
1
0
Most Liked Positive Review
5.0
Never heard of one!
True top dead center is a two minute job with this little gem. Get the timing tape after you find TDC
Most Liked Negative Review
3.0
Works, but you get what you pay for
The collar can be tightly threaded into the spark plug hole, but the center bolt threads are really sloppy, which could lead to error as the bolt may turn. But for the price, it works ok.
Filter by Ratings
Better than expected
5.0
9 months ago
After burner
Lincoln
Verified
For the money, it ended up being a better quality tool than I thought it would be worked perfect
Would Recommend
Worked, jam nut would be nice.
4.0
4 years ago
Buzzard
Kansas
Verified
Used on 400 ford, worked but no jam nut to hold in place, tried adding one but then shaft would not reach piston.
Would Recommend
I would buy this again
5.0
4 years ago
Oliver 88
Lawrence Ks
Verified
Used to find TDC to set timing marks
Would Recommend
I would buy this again
5.0
5 years ago
JA
New Jersey
Verified
Used to find true TDC
Would Recommend
Only needed it one time. Will reuse it over and over.
5.0
6 years ago
Bully
Moncks Corner, SC
Verified
Easy ordering, paying, and shipping! Just what you expect from your great company---Speedway Motors!
Would Recommend
Works Great
5.0
6 years ago
Jon
Seward NE
Verified
The product has one use, hard to mess this up.
Would Recommend
Perfect part for what I needed to do.
5.0
6 years ago
John
Sterling, VA
Verified
Perfect part. Excellent price. Just what I needed.
Would Recommend
TDC finder
3.0
7 years ago
CHIP
AR
Verified
The hex on this tool is 7/8" and will not go into a Ford aluminum cylinder head as the hex is too big for the smaller cavity to the plug. I had to peer sand down the flats on the tool to 5/8" as that is the hex size of the plugs!!!!
Would Not Recommend
I WOULD RECOMMEND THIS TO A FRIEND
4.0
8 years ago
RUDDERRACING
WINTER HAVEN FLORIDA
Verified
THIS WORKED OUT GREAT FOR MY NEEDS
Would Recommend
Never heard of one!
5.0
8 years ago
Robert
Kentucky
Verified
True top dead center is a two minute job with this little gem. Get the timing tape after you find TDC
Would Recommend
Showing 10 of 17 reviews
2 Questions • 2 Answers
Would this tool be suitable to find top dead center for distributor install and are there directions? I'm a bit confused on how it works. How do you know how far to turn it in etc?
by Robert
• 8 years ago
1 answer
View Answer
Is this to locate TDC on a 1988 s10 blazer with 4.3 v6 engine? If not, could you recommend a simple tool to use as the #1 spark plug hole is difficult to get to. Thanks. :)
by Cara the newbe to TDC
• 8 years ago
1 answer
View Answer
2 of 2 questions shown
