152-piece set includes 1/4 inch insert bits, accessories, and molded handle magnetic bit driver. Includes 12 x 6 inch foam organizer.
- Low Shoulders for Recessed Screws: For small tip sizes, the shoulders on the hex shank are reduced as low as possible, keeping the shaft diameter narrow so it can reach into tight, recessed areas.
- Hardened Steel with Precise Tip Geometry: The bits are made of S2 tool steel and are through-hardened to 58 - 61 HRC.
- Stamped Markings and Satin Finish: The tip size is permanently stamped onto every bit in large, clear type.
- Free-Standing Bit Rails: The flexible rails securely grip the bits so they can’t fall out, while also making it easy to remove any bit one-handed.
- Soft Overmold Grip with Flared End for Controlled Spinning: The handle’s red exterior is made of a lightly textured TPE material that is slightly soft and grippy for controlled spinning.
Set Includes:
- Phillips and Slotted Insert Bit Set (1.18 Inch Length) with Rail (12-Piece)
- Phillips: P0, P1 (x2), P2 (x2), P3 (4 sizes)
- Slotted: 1/8, 5/32, 3/16, 7/32, 1/4, 5/16 in. (6 sizes)
- Slotted and Pozidriv Insert Bit Set (1.18 Inch Length) with Rail (12-Piece)
- Slotted: 3, 3.5, 4, 4.5, 5.5, 6.5, 8 mm (7 sizes)
- Pozidriv: PZ0, PZ1, PZ2 (x2), PZ3 (4 sizes)
- Hex Insert Bit Set (1.18 Inch Length) with Rail (12-Piece)
- Hex: 1/16 (x2), 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 in. (11 sizes)
- Tamper Hex Insert Bit Set (1.18 Inch Length) with Rail (12-Piece)
- Tamper Hex: 5/64 (x2), 3/32 (x2), 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 in. (10 sizes)
- Hex Insert Bit Set (1.18 Inch Length) with Rail (12-Piece)
- Hex: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8 mm (12 sizes)
- Tamper Hex Insert Bit Set (1.18 Inch Length) with Rail (12-Piece)
- Tamper Hex: 2 (x2), 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8 mm (11 sizes)
- Star Insert Bit Set (1.18 Inch Length) with Rail (12-Piece)
- Star: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45 (12 sizes)
- Tamper Star Insert Bit Set (1.18 Inch Length) with Rail (12-Piece)
- Tamper Star: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45 (12 sizes)
- Star Plus Insert Bit Set (1.18 Inch Length) with Rail (12-Piece)
- Star Plus: 6IP, 7IP, 8IP, 9IP, 10IP, 15IP, 20IP, 25IP, 27IP, 30IP, 40IP, 45IP (12 sizes)
- Tamper Star Plus Insert Bit Set (1.18 Inch Length) with Rail (12-Piece)
- Tamper Star Plus: 6IPR, 7IPR, 8IPR, 9IPR, 10IPR, 15IPR, 20IPR, 25IPR, 27IPR, 30IPR, 40IPR, 45IPR (12 sizes)
- Square and Triple Square Insert Bit Set (1.18 Inch Length) with Rail (12-Piece)
- Square: S0, S1 (x2), S2, S3, S4 (5 sizes)
- Triple Square: M3, M4, M5, M6, M7, M8 (6 sizes)
- Clutch and Spanner Insert Bit Set (1.18 Inch Length) with Rail (9-Piece)
- Clutch: 1/8, 5/32, 3/16, 7/32, 1/4 in. (5 sizes)
- Spanner: #4, #6, #8, #10 (4 sizes)
- 1/4 Inch Hex Shank Magnetic Pickup Bit
- 1/4 Inch Hex Shank Magnetic Bit Holder Extensions 2, 4, 8 in.
- 1/4 Inch Hex Shank to 4 mm Magnetic Hex Bit Holder
- 1/4 Inch Hex Shank to 1/4 Inch Drive Socket Adapter 0.75, 2 in.
- 1/4 Inch Hex Shank to 3/8 Inch Drive Socket Adapter 0.91, 2 in.
- 1/4 Inch Hex Shank to 1/2 Inch Drive Socket Adapter
- 1/4 Inch Molded Handle Magnetic Bit Driver
- 9-Tool 1/4 Inch Bit Rail
- Molded Handle Bit Driver, Bit Rail, and Accessory Set Foam Organizer (12 x 6 Inch)
Specifications:
- Country of Origin: Bits, bit rails, bit accessories, and bit driver blade made in Taiwan. Bit driver handle made in Germany. Foam made in USA.
- Item Weight: 2.74 lb.
