Tekton SID92339 17 Piece 1/2 In. Drive 12 Point Impact Socket Set

The size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking. The narrowed socket diameter goes all the way down to the base of the socket on small deep-length sizes. This allows for better reach into tight recessed areas. Not only is the socket a deep length, but the interior well also extends far into the socket, which allows for better fastener engagement in more situations. Radiused corners prevent fastener round-off by applying force to a fastener’s flat sides rather than its corners. Each socket size meets a minimum of 1.2 times the ANSI/ASME standard for proof torque. Part by part, we choose the best combination of steel alloys, heat treating specifications, and forming processes to meet the highest performance requirements.

• Sockets work for both types of anvils found on 1/2 inch drive impact wrenches
• Provides an exact fit for 12-point fasteners
• There are no published ASME standards for 5/16 in., 11/32 in., 8 mm, and 39 mm impact sockets in 1/2 inch drive
• High-density polyethylene case withstands common lubricants, fuels, and solvents

Set Includes:

MM Deep length

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm 

6.54 lb