Tekton SIB91201 3/8" Drive Hex Impact Bit Socket Set, 22-Piece

3/8 Inch Drive Hex Impact Bit Socket Set with Rails and Tray, 22-Piece (5/32-9/16 in., 4-14 mm)

Tekton's two-piece design allows us to optimize the steel alloys, heat treatments, and forming processes for the bit and socket separately, resulting in a tool that's higher performing and more durable than traditional one-piece impact bit sockets. The two pieces are permanently press-fit together and won't loosen over time. The socket is made is made from 6140 chromium-vanadium steel that's heat-treated to 40–47 HRC for use on impact wrenches. The socket is also coated with a manganese phosphate finish to resist corrosion. The bits are made from S2 steel that's heat-treated to a higher hardness (58–62 HRC) to help maintain their geometry under stress. The inside of the socket's drive end has smooth walls with no detent grooves to support engagement with drive tools that use friction ring anvils. A detent pin hole on one side of the drive end also supports engagement with detent pin anvil styles.

• Precise Bit Geometry – The bit tip is machined to precise tolerances for an exact fit with hex fasteners
• Optimal Two-Piece Design – We use separate steel alloys and processes for the bit and socket, resulting in a higher performing tool than one-piece designs
• Permanent Connection – The bit is pressed directly into the socket for a permanent connection that won't loosen over time or under stress
• Two Size Markings – The size is marked with a high-visibility laser marking and a permanent stamped marking that won't rub off
• Friction Ring or Detent Pin Anvils – Smooth walls inside the drive end and a detent pin hole make the bit sockets compatible with both drive tool anvil types
• 9-pc. 3/8 in. drive hex impact bit sockets: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 in.
• 13-pc. 3/8 in. drive hex impact bit sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
• 2-pc. 13 inch socket rails
• 13 inch socket rail tray