Tekton LRD90806 Mini Pry Bar Set (6-Piece)

Mini Pry Bar Set (6-Piece)

The Tekton Mini Pry Bar Set (6-Piece) has two mini pry bars with 30-degree angled ends, two mini pry bars with 50-degree angled ends, and two straight mini pry bars. Three of the mini pry bars have a 5/32 inch shaft diameter, and three have a 1/4 inch shaft diameter. The 30-degree angled ends provide a range of motion for prying and lifting components within tight spaces. The 50-degree ends provide a greater range of motion for prying and lifting components than most other small pry bars. The classic square handles are long and slender with contoured sides for overall versatility and maneuverability. The handles are made from glass-reinforced nylon that's resistant to fuels, oils, and chemicals. All items in this set feature AISI 8650 steel shafts that are made from a strong Ni-Cr-Mo alloy that's hardened to 50–54 HRC. Our family of mini pry bar, pick, and hook products is made entirely in Michigan with only USA-sourced materials. Machining, bending, coining, handle molding, and press-fitting the handle and blade take place at our Grand Rapids, Michigan, manufacturing facility.

• Tip Geometry – The sharp 0.010 inch tip of our straight mini pry bars can wedge between and access openings that a slotted slotted screwdriver and other similar mini pry bars cannot
• Shaft and Handle Proportions – The 3.0 inch shaft offers optimal reach and control, and the 3.6 inch handle is longer to fit in your hand better
• AISI 8650 Steel Shafts – The shafts are made from a strong Ni-Cr-Mo alloy that's hardened to 50–54 HRC
• Nylon 6 Handles – The handles are made from a glass-reinforced nylon that's resistant to fuels, oils, and chemicals
• Manufactured in Michigan – Tekton's family of picks, hooks, and mini pry bars is made entirely in Michigan with only USA-sourced materials
• 3-pc. 1/4 in. mini pry bars: straight, 30-degree, 50-degree
• 3-pc. 5/32 in. mini pry bars: straight, 30-degree, 50-degree