Tekton KLX91304 Ball End Hex L-Key Set with Holders, 23-Piece

Ball End Hex L-Key Set with Holders, 23-Piece (0.050-3/8 in., 1.3-10 mm)

The Tekton 23-Piece Ball End Hex L-Key Set includes the most common hex key sizes, ranging from 0.050–3/8 inch and 1.3–10 mm. The set includes durable holders with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. You can also face the L-keys to the side for a flat, low-profile organization solution. The L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways: both with a high-visibility laser marking and a stamped marking.

• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters
• 20-Degree Ball Angle Increases Access – Our L-keys feature a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength
• Refined Edges – Tekton keys have slightly chamfered edges (except sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners
• Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion
• Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking
• 13-pc. ball end hex key wrenches: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.
• 10-pc. ball end hex key wrenches: 1.3, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm
• Black hex key holder
• Red hex key holder