Tanks TAN-MM MeterMatch Fuel Gauge Interface Module

#910851090

Tanks TAN-MM MeterMatch Fuel Gauge Interface Module

User can calibrate a custom ohm range (between 0-3,000 ohms)
The gauge can be calibrated at empty, full, and two other points ensuring accurate readings even with odd shaped gas tanks
The interface is compatible with nearly any short sweep fuel gauge and fuel sender combination

$90.99

/each

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

User can calibrate a custom ohm range (between 0-3,000 ohms)
The gauge can be calibrated at empty, full, and two other points ensuring accurate readings even with odd shaped gas tanks
The interface is compatible with nearly any short sweep fuel gauge and fuel sender combination
Easy screw terminal wire connections
Compact size, 2.4" x 1.85" x 0.93"

See more details

Key Specs

MFG. Part #	TAN-MM
Brand	Tanks

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Tanks TAN-MM Details

Convert any ohm range fuel level sender to work with any ohm range fuel gauge!

The MeterMatch ^TM is for making analog gauges more accurate, or to allow you to mix and match different gauges and senders. It can be used with many gauges that have resistive senders - such as common fuel, oil-pressure and temperature gauges. It also allows you to have a low and/or high set points that can trigger a blinking LED indicator to alert if the gauge exceeds normal values.

Fuel level gauges are designed to work with a specific ohm range fuel sender. Different automobile and gauge manufacturers use different ohm ranges to correctly operate their gauges. This can cause problems for a person who is updating their vehicle with new gauges or a new gas tank and fuel sender.

This module will allow you to use your stock sender with virtually all common analog fuel gauges and vice versa. No longer do you need to drop your tank to change or customize your sender or re-calibrate your fuel gauge. With this simple device you can ensure your gauges are accurately reading your fuel sender and more!

The MeterMatch ^TM interface is the problem-solver between fuel senders and gauges to correct ohm mismatch and erratic movement due to fuel slosh.

Key Features

User can calibrate a custom ohm range (between 0-3,000 ohms)
The gauge can be calibrated at empty, full, and two other points ensuring accurate readings even with odd shaped gas tanks
The interface is compatible with nearly any short sweep fuel gauge and fuel sender combination
Easy screw terminal wire connections
Compact size, 2.4" x 1.85" x 0.93"
Simple rotary knob and push button calibration
Programmable voltage correction
Programmable low (or high) alarm (works with a LED indicator)
Programmable averaging can be turned on or off to help minimize needle bouncing
Can operate on 7 Volts DC through 24 Volts DC
Made in the USA

Warranty Information

Speedway Motors cannot facilitate the return of defective Tanks Inc.’s products as they have requested to handle these directly with the consumer. For defective product support and Return Authorization, please contact Tanks Inc. at (319) 465-3522 or (877) 596-3842.

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

Tanks TAN-MM Specifications

KEY SPECS
MFG. Part #	TAN-MM
Brand	Tanks

Ratings & Reviews

Be the first to write a review.

Questions & Answers

1 Question • 1 Answer

Sort Questions

Older fords used 6 volt gauges , will it work with them?

by Roger

• 3 months ago

1 answer

View Answer

1 of 1 questions shown