|
#91032390
$77.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Single Joint Universal Joint Style
| MFG. Part # | 401-50620 |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" Round |
| End #2 | 1" DD GM OEM |
| Spline Count | No splines |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDon't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4 round weld-on end.
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1". DO NOT interchange these u-joints.
GM Column/Universal
1" Double D
1" DD on this U-joint is undersized and application-specific to the 1" DD on an OEM GM column. Therefore, this unit is not applicable to an aftermarket 1" DD column such as the Ididit or Flaming River applications which measures out to the full 1.000" DD application.
Application
STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application.
Guides & Documents
| KEY SPECS | |
|---|---|
| MFG. Part # | 401-50620 |
| Brand | Sweet Manufacturing |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" Round |
| End #2 | 1" DD GM OEM |
| Spline Count | No splines |
| GENERAL | |
| Spline End | No Splines |
| Overall Length | 3.75" |
| Outside Diameter | 1.355" |
| Max Operating Angle | 30 ° |
| Set Screw Included | No |
| Material Type | Steel |
| Finish | Oxide |
| Color | Black |
| Sold in Quantity | Each |
| Notes | 1" DD IS .985 ID |
5
8 Reviews
Customers praise our product for its exceptional quality, practicality, and usability. They appreciate it as the perfect fit for custom works and various applications, emphasising the product's universal adaptability. Users also note the robust material quality that allows the item to work perfectly. Customers have also recommended it over other brands due to its reliable performance over many years. Some report slight modifications for it to fit, reflecting its flexible nature and our customers' satisfaction with their custom solutions using our product.
5
8 reviews
5
8
4
0
3
0
2
0
1
0
Filter by Ratings
Excellent quality product just what I needed.
5.0
4 years ago
Steve
Okc
Verified
Everyone else's item on back order, Speedway had stuff in stock, fast shipping, very satisfied!
Would Recommend
Product as advertised.
5.0
5 years ago
Jeb
Wichita Kansas
Verified
Nice built part.
Would Recommend
I would buy this product again.
5.0
6 years ago
Chevy Boy
Somonauk, Illinois
Verified
Really easy to adapt for applications.
Would Recommend
Great price
5.0
8 years ago
Webb
Nebraska
Verified
For the Custom fit works best
Would Recommend
Works as expected
5.0
9 years ago
Doc
Missouri
Verified
This knuckle looks good and works perfectly. I have purchased this product for multiple applications. I would recommend this product.
Would Recommend
GM column universal
5.0
11 years ago
Hank
Santee, Ca
Verified
Delivery has always been on the time you have told me to look for it..
Would Recommend
Good product.
5.0
11 years ago
wheels777
York, PA
Verified
I have used these parts for many years and they have worked well without any issues.
Would Recommend
Awesome joint
5.0
16 years ago
ox_man
St Croix Falls, WI
only problem i has was i needed to grind my steering column some for it to fit. But also to note the original stock joint came off pretty tight as well. this was used to make a custom steering shaft for a 94 s-10 body on a 78 1/2 Chevy frame
Would Recommend
Showing 8 of 8 reviews
4 Questions • 7 Answers
Early 90's chevy truck column has a 1" DD end which is hollow and a cross machined thru hole. Will the set screws work with this??
by David
• 7 years ago
2 answers
View Answers
I have the speedway column for a 57 Chevy #91032997 is this the correct DD to 3/4 round Joint?
by Shammy
• 8 years ago
1 answer
View Answer
so does the double d end measure 1" or just under
by keith
• 9 years ago
1 answer
View Answer
How does this U-Joint attach to the column? Does it have a set screw or does it have to be welded on to the column?
by Ruben
• 13 years ago
3 answers
View Answers
4 of 4 questions shown
