|
#9106192
$127.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Single Joint Universal Joint Style
| MFG. Part # | 401-61920 |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 1" DD GM OEM |
| Spline Count | No splines |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDon't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1". DO NOT interchange these u-joints.
1" DD on this U-joint is undersized and application specific to the 1" DD on an OEM GM column. Therefore, this unit is not applicable to an aftermarket 1" DD column such as the Ididt or Flaming River applications which measures out to the full 1.000" DD application. Aftermarket 1" DD column will use u-joint # 910-32401
Application
STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application.
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 401-61920 |
| Brand | Sweet Manufacturing |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 1" DD GM OEM |
| Spline Count | No splines |
| GENERAL | |
| Spline End | No Splines |
| Overall Length | 3.75" |
| Outside Diameter | 1.355" |
| Max Operating Angle | 30 ° |
| Set Screw Included | Yes |
| Material Type | Steel |
| Finish | Chrome |
| Sold in Quantity | Each |
4.7
7 Reviews
The product garners high praise for its robustness, quality and fitting precision. Buyers commend the product for its exceptional finish and made in USA quality. Versatility and utility are noted, with customers appreciating its capacity for various tasks. It is deemed superior in craftmanship and functionality compared to comparable options. A repeated buying sentiment resonates among users, enhancing its reputation as a reliable and outstanding product.
4.7
7 reviews
5
5
4
2
3
0
2
0
1
0
Filter by Ratings
Would buy again
4.0
3 months ago
Mr C
Wi
Verified
Worked perfect for my set up nice chrome
Would Recommend
I would buy again
4.0
2 years ago
Mr C
Chippewa Wi
Verified
Good quality, nice chrome expensive but when you need it, gotta have it works well
Would Recommend
I would buy this product over and over
5.0
5 years ago
No nickname
Hagerstown Maryland
Verified
Very nice finish
Would Recommend
Very well made
5.0
5 years ago
Gary's garage
Kennewick, WA
Verified
Going into a Nova rack and pinion remake. Perfect fit.
Would Recommend
I would buy this again
5.0
5 years ago
Mr C
Wisconsin
Verified
Good quality did the job I needed it to
Would Recommend
Very nice universal joint. Glad to see it is made in USA.
5.0
9 years ago
Jeff
Monroe, MI
Verified
Chrome finish is very impressive. Note that it is made with pride in Kalamazoo, Michigan.
Would Recommend
excellent
5.0
13 years ago
kipp
Colorado, USA
Verified
This is a very good product , well made. Thank you
Would Recommend
Showing 7 of 7 reviews
Be the first to ask a question.
