|
#91081106
$20.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 2.86" Overall Length, .33" Depth, Steel
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91081106 |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Length | 2.86" |
| Depth | .33" |
| Material Type | Steel |
| Finish | Natural |
| Sold in Quantity | Each |
| Notes | Built to fit original Stromberg jets; aftermarket jets are thicker (aprrox. .011"). Lightly tap the wrench onto aftermarket jets to remove, and then file flat sides for proper fit. |
3.7
36 Reviews
Users commend the product's functionality, particularly in jet swapping and carb rebuilding tasks. Despite occasional durability issues, the tool demonstrated its worth in handling tough and stuck jets, with many customers noting its convenience and ease-of-use. Some customers, however, mentioned modifications such as shortening the tool for specific use cases. Several reviews suggest that the tool's quality may not be suitable for heavy-duty use, but it provides excellent value for occasional and light-duty tasks. The product's value was often emphasized, with customers recommending it for those dealing with original carbs and jets. Overall, the product provides satisfactory performance for its price.
3.7
36 reviews
5
18
4
5
3
5
2
0
1
8
Most Liked Positive Review
4.0
The tool worked very well.
97 jets are very hard to remove without the correct tool. I hadn't seen my old tool in years so I thought that since I had a few carbs to restore I would give it a try. It is not he highest quality tool but it sure saved the jets and a very rare original carb.
Most Liked Negative Review
1.0
It broke, but Speedway set things right.
I can't recommend this tool. I was as careful as I could be when I attempted to use it (used lots of spray lubricant and didn't use too much force), but it broke. As the description notes, I had to tap it down over the jets to get it to fit. When I bought the more expensive version of the same tool, this was not required. I was able to pull the jets with that tool without incident. I called Speedway to explain what had happened and they refunded the cost of the tool and even the shipping cost, no questions asked. Kudos to them for that. Speedway sells a lot of good stuff, but in this case I recommend sPending a little more for a higher quality tool. It will save time and frustration.
Filter by Ratings
Well built tool needed for jet removal
5.0
9 months ago
53 Merc
allentown, PA
Verified
Worked well like it should.
Would Recommend
yes
4.0
11 months ago
cj
Ga.
Verified
Have to be careful not to monkey up the threads in the carb when removing them , use a little heat on the carb , and they will unscrew easier .
Would Recommend
Would buy again
4.0
a year ago
Freddyfairlane
Winnipeg Canada
Verified
It worked well enough, fit and finish could be a little better. All in all it is good tool and will get the job done.
Would Recommend
Yes
5.0
a year ago
Bill Howitt
Windsor. Canada
Verified
It's a tool. Push. Turn. Retract
Would Recommend
why would I need more than one?
3.0
3 years ago
abdy
tucson
Verified
I actually had to enlarge the business end of the tool as it was too small to fit over the jets.
Would Not Recommend
Avoid this one,
1.0
3 years ago
Wolf Enterprises
San Antonio Florida
Verified
I bought two of these and they both failed on the first use. One broke in two pieces and the tip mushroomed on the other.
Tool arrival
5.0
4 years ago
Marc
Roseville
Verified
Tool arrived as advertised, have not needed to use it just yet but appears perfect
Would Recommend
One time purchase
5.0
5 years ago
Grant
Florida
Verified
easy to use
Works well
5.0
5 years ago
Spencer
Sea side ca
Verified
Works perfect
Would Recommend
Works as advertised
3.0
5 years ago
Goin Owen
Seattle WA.
Verified
Was forced to remove carbs to access jets, but tool worked just fine.
Would Recommend
Showing 10 of 36 reviews
1 Question • 1 Answer
Will this tool work for older Holley 94 carburetor?
by Really?
• 10 years ago
1 answer
View Answer
1 of 1 questions shown
