|
#91511660
$22.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese aluminum air cleaner spacers are specifically designed to work with Stromberg carburetors. They fit carbs with a air horn neck measuring 2.61" and come in three different heights to fit your preference.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Height to see |
| Brand | Speedway Motors |
| GENERAL | |
| Mounted Height | Select Height to see |
| Diameter | 2.61" |
| Inside Diameter | 2.50" |
| Outside Diameter | 2.88" |
| Material Type | Aluminum |
| Finish | Select Height to see |
| Sold in Quantity | Each |
| Inlet Diameter (Fraction) | 2-5/8" |
4.7
24 Reviews
Customers generally regard the product as a reliable and high-quality accessory for car modifications, particularly for unique or vintage vehicles. They have commended its sturdy craftsmanship and the boost it provides in enhancing the functionality and aesthetic of custom filters and carbs. Users appreciated its precise fitting and its capacity to solve fit issues with certain car parts with some modifications. However, several users have stated that it required a bit of machining or sanding to fit their specific models. Despite this, the overall sentiment is that the product is well worth the purchase due to its practicality, fine finish and the professional look it imparts to their cars. Some users have suggested minor improvements, like having stainless-steel set screws for a better look. Despite some sizing issues, the product maintains its reputation for quality and effectiveness.
4.7
24 reviews
5
18
4
4
3
2
2
0
1
0
Most Liked Positive Review
5.0
This product makes the engine look very
I was pleased with the design and finish on the 3 spacers I purchased. Finish was very shinny and using a 3",2",and 1" spacers on my Vintage Weind 3 deuce manifold with 3 Vintage Stromberg 97 large circle carbs looks great! One of the spacers was a tight fit and I had to remove a small amount of metal from my carb to fit properly. I measured the ID on spacer in question and found it was smaller than other two spacers. Quality control should have detected this problem. I can't wait to show them off at the next car show! Thanks!
Most Liked Negative Review
3.0
to small
I was told by your tech this would fit on your crome stromberg 97 and it dose not had to have it machined to fit works well now.
Filter by Ratings
Fits perfectly
5.0
7 months ago
Jase
Colorado
Verified
It was exactly what I needed and fit perfectly
Would Recommend
Fit's like a glove
5.0
a year ago
Milner
Phoenix
Verified
I bought these for my Stromberg carbonators. Fit's & looks great. Perfect fit for the scoops.
Would Recommend
It is what it says it is.
5.0
a year ago
Bullfishbullfish
Denver
Verified
I got exactly what I expected. It fit perfectly with no issues. The only thing I noticed was the finish was not absolutely perfectly smooth. I imagine from machining on a lathe not big issue as it's barely noticeable. Happy customer.
Would Recommend
I would buy again
5.0
a year ago
Rat rod
Omaha ne
Verified
1929 model a
Would Recommend
I would buy again
5.0
a year ago
Rat rod
Omaha ne
Verified
29 model a looks and fits great
Would Recommend
I would buy again
5.0
a year ago
Rat rod
Omaha ne
Verified
29 model a
Would Recommend
Inside diameter is 2.611". My 94 carb neck is 2.625".
4.0
a year ago
Duke
Palmdale, CA
Verified
Nice machining and finish. At 2.611" it probably slips onto a 97 but is a no-go on my 94. Due to 60 years of air cleaner wear the top of my carb neck is 2.620". The bottom seat is right at 2.625". It needs 0.014" machined off of the spacer bottom ID in order to slide on. The OD at the top of the spacer measures slightly less at 2.600". A 1940 Ford air cleaner is a very loose fit, being designed for 2.625". Great looking part but you may need to machine the bottom and shim the top. Going to keep it and play with it until it fits.
Would Recommend
wouldnt buy
5.0
2 years ago
jjjalopy
colo
Verified
quality product gave the look i was after
Would Recommend
Easy fix
5.0
2 years ago
66 Chevy
South Carolina
Verified
It didn't have the slot fir the location tab on my air cleaner but was a simple fix with a saw
Would Recommend
Perfect fit, not too tight & not too big!
5.0
3 years ago
HotRod Hudson
Montana
Verified
I needed a 2" riser for my stock carb on a 37 Hudson coupe to clear the spark plug wire tube. Perfect fit!
Would Recommend
Showing 10 of 24 reviews
2 Questions • 3 Answers
When mounting on an original Stromberg 97, which end slips over the carb, the end with the set screw or the end with the smaller outer diameter? Additionally, what is outside diameter of the neck that the air cleaner fits onto? Thanks.
by RM
• 9 years ago
2 answers
View Answers
Will this fit holley 94s?
by restorer/ fabricator
• 10 years ago
1 answer
View Answer
2 of 2 questions shown
