|
#5606181
$14.49
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 3.38" Extended Length, Aluminum, Natural
| MFG. Part # | 5606181 |
| Brand | Speedway Motors |
| Overall Length | 3.95" |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThrottle arms to attach linkage to the 0.282" dia., extended shafts on Stromberg 97's, 9 Super 7® ® and Ford/Holley 94 carbs. Use with 3/16" (10-32) heims and linkage.
Charts
560-6181 Instructions (PDF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 5606181 |
| Brand | Speedway Motors |
| Overall Length | 3.95" |
| Material Type | Aluminum |
| GENERAL | |
| Extended Length | 3.38" |
| Compressed Length | 1.10" |
| Inside Diameter | .29" |
| Hole Diameter | .20" |
| Thread Type | RH Female |
| Material Thickness | .40" |
| Thread Pitch | 3/16" (10-32) |
| Finish | Natural |
| Sold in Quantity | Each |
| Notes | 10-32 Set screw is included. |
4.4
18 Reviews
Customers appreciate the product's fit and functionality for a diverse range of carburetor setups, from HEMIs to dual strombergs on an 8BA flathead. The quality and adaptability of the carburetor linkage unit were positively highlighted, with mentions of its use in manual choke conversion and throttle linkage completion. Some customers noted that additional finishing was beneficial for optimal aesthetics and that important parts like set screws and throttle balls might not be included, resulting in extra purchases. However, its general utility, practicality, and affordability position it as a recommended choice for car enthusiasts.
4.4
18 reviews
5
13
4
2
3
1
2
1
1
1
Most Liked Positive Review
4.0
Good part, needs smoothing
I drilled the center hole out to 1/4 inch to fit on the end of my injector shaft. The number of holes give several options for adjustment. The finish need some smoothing as it still has some machine marks, easy fix. Set screw was not included.
Most Liked Negative Review
3.0
Decent part for the price.
This is a decent piece, but needs a little spit and polish to look good on a nice setup. It was a fairly rough casting, but a little time on the sander and buffing wheel gave it the right shape and finish to match the old linkage on my intake. There was more than enough material to modify this to fit on a Rochester 2Jet, and only took a couple minutes to do.
Filter by Ratings
Stromberg carb linkage
5.0
11 months ago
34 Plymouth
Needles
Verified
Used on my multi carb setup easy to install and gives you plenty of options for your linkage
Would Recommend
I would buy again
5.0
a year ago
Freddyfairlane
Winnipeg Canada
Verified
Fits great on the new shafts, nice looking piece
Would Recommend
Great product and I bought two of them.
5.0
2 years ago
Mike
Tennessee
Verified
Works great on my Y-block setup with three deuces and progressive linkage. Great deal too.
Would Recommend
The part worked out well and very reasonably priced.
5.0
2 years ago
Sarge
Oregon
Verified
I'm using the part to fit a Stromberg 97 on my '52 Chevy truck 235. Not finished with the conversion yet, but the lever arm bridged a throttle link gap
Would Recommend
Solid unit
5.0
4 years ago
Vannuck
Vancouver
Verified
Fits like a glove.
GOOD QUALITY
5.0
4 years ago
CHUCK
LOVELAND, CO
Verified
8X2 INTAKE ON A HEMI
Would Recommend
It was exactly what I needed for my carburetor.
5.0
5 years ago
Frank
Valley Ne
Verified
I used the linkage arm to make my carburetor a manual choke instead of an electric choke
Would Recommend
I would recommend this item to anyone.
5.0
5 years ago
Muggy's
Hillsville Va
Verified
I put this on my 39 ford with a 289 motor. Love the look.
Would Recommend
Works great
5.0
5 years ago
31 coupe
Ohio
Verified
Used for dual strombergs on an 8BA flathead
Good product
5.0
5 years ago
Nick
Bland va
Verified
It works as expected
Would Recommend
Showing 10 of 18 reviews
1 Question • 2 Answers
Does the set screw come with this part?
by Homer
• 9 years ago
2 answers
View Answers
1 of 1 questions shown
