|
#91001850
$47.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 22.00" Overall Length, Steel
| MFG. Part # | 91001850 |
| Overall Length | 22.00" |
| Material Type | Steel |
| End #1 | 3/4" DD |
| End #2 | 3/4" DD |
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway now offers a steering shaft which is 3/4" DD machined the entire length of the steering shaft. This makes it easier to set up your steering. The carbon steel steering shaft come in 22".
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91001850 |
| Brand | Speedway Motors |
| Overall Length | 22.00" |
| Material Type | Steel |
| End #1 | 3/4" DD |
| End #2 | 3/4" DD |
| GENERAL | |
| Overall Diameter | .75" |
| Finish | Zinc Plated |
| Sold in Quantity | Each |
4.9
34 Reviews
The product's outstanding qualities include its excellent fit, usability, durability and the ease of modifying it to suit specific needs. With an impeccable build and defined features, it has proven to work perfectly for different car models. Several users praised the product, emphasizing the considerable advantage it offers in comparison to other brands, which suffer from inconsistencies. The superior material quality contributes to its sturdiness and longevity, making it an integral part of hot rod builds. The only complaint noted was about the wiggle, however, this issue was not prevalent and the product was generally deemed as of quality, practical and reliable.
4.9
34 reviews
5
33
4
0
3
1
2
0
1
0
Most Liked Positive Review
5.0
Just as ordered
My item is just as described from speedway The shipping was fast and service is what I expect, that is the reason I continue to buy from Speedway. The steering shaft is a bit pricey but if you need it and you need it now, you have to pay. Everyone else is charging the same price
Most Liked Negative Review
3.0
Too loose
I bought this 22" DD shaft along with a Heim joint and a steering u-joint. The shaft fits too loosely for my taste. It's just as loose in the steering column hole. I had a couple of long pieces of 3/4" round bars that were just a tiny bit larger so I cut it down and made the DD ends. They fit perfectly with no wiggle whatsoever. I also had a section of a DD shaft that came off an older Ford p/u. It also fit snugly into the u-joint. I think this Speedway shaft should be made a little bigger. It's okay if you don't mind the wiggle. I'll just toss mine over to the "spare parts" section of the shop. I think this part is overpriced for what it is. Speedway has lots of good stuff but this isn't one of them.
Filter by Ratings
Yes i would buy this again
5.0
3 months ago
Mikey
Littleton Co
Verified
Just what I was looking I n for
Would Recommend
Yes
5.0
7 months ago
Dude
Iowa
Verified
Easy to install great product no problems with it
Would Recommend
Perfect Fit
5.0
8 months ago
BobRob2014
Bella Vista, Arkansas
Verified
This part was a perfect fit on my 31 Brookville roadster.
Would Recommend
Perfect fit
5.0
a year ago
Buck
Leander, Texas
Verified
Was the right measurement for what I needed.
Would Recommend
Yed
5.0
a year ago
Wilson
Ohio
Verified
Good fit on 64 nova
Would Recommend
Need it? Get it
5.0
a year ago
Lefty
Indiana
Verified
Very easy fit and made the job simple.
Would Recommend
i would definely purchase this item again
5.0
a year ago
Jim
Autryville NC
Verified
it's a cut to fit item and worked out perfectly
Would Recommend
yes
5.0
2 years ago
toad
mo.
Verified
to adapt steering
Would Recommend
yes
5.0
4 years ago
tony
turlock ca
Verified
on a 1963 c-10
Would Recommend
Perfect shaft
5.0
4 years ago
Thunder
Sedro Woolley, WA
Verified
Needed a little longer shaft. My mock up was to short.
Would Recommend
Showing 10 of 34 reviews
2 Questions • 6 Answers
Is the end of the shaft that is drilled and tapped for the 5/16" bolt also machined to accommodate a steering wheel boss? My existing shaft has 2 flat areas machined into the end of the 3/4" round shaft with approximately .057" removed from the top of the shaft and .057" removed from the bottom of the shaft. These flat areas extend approximately .75" from the end of the shaft where the 5/16" bolt hole is drilled and tapped. I'm ready to order this shaft immediately, if it meets my needs. Your prompt attention to this email is appreciated. Thanks.
by Bob
• 8 years ago
3 answers
View Answers
can i cut it to fit if i get 36 inch pice
by jerry
• 15 years ago
3 answers
View Answers
2 of 2 questions shown
