|
#91034818
Steel Lower Ball Joint Sleeve, K6117 Style
$10.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91034818 Details
Speedway Motors 91034818 Details
Item Details
Fits 917-20038-1 lower ball joint2.198" O.D.
1.989" I.D.
1" Height
Speedway Motors 91034818 Specifications
Speedway Motors 91034818 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91034818 |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Height | 1.00" |
| Outside Diameter | 2.20" |
| Inside Diameter | 1.99" |
| Overall Thickness | .11" |
| Material Type | Steel |
| Sold in Quantity | Each |
Ratings & Reviews
4.7
3 Reviews
Customers benefit from using these sleeves for modifying car parts, particularly on Chev control arms. They rave about the effective results they get, proving it possible to fit 1/2 ton ball joints into a 1-ton control arm. The sleeves provide a practical solution for custom car modifications, highlighting their usability and adaptability with regards to welding projects. The material quality is also highly appreciated, displaying durability and safety during operations. The superiority of the product is reflected in its proved assistance to fabrication work. The product is well-recommended for those seeking to undertake similar projects.
Ratings & Reviews
4.7
3 Reviews
Customers benefit from using these sleeves for modifying car parts, particularly on Chev control arms. They rave about the effective results they get, proving it possible to fit 1/2 ton ball joints into a 1-ton control arm. The sleeves provide a practical solution for custom car modifications, highlighting their usability and adaptability with regards to welding projects. The material quality is also highly appreciated, displaying durability and safety during operations. The superiority of the product is reflected in its proved assistance to fabrication work. The product is well-recommended for those seeking to undertake similar projects.
4.7
3 reviews
5
2
4
1
3
0
2
0
1
0
Filter by Ratings
Worked well, not perfect
4.0
a year ago
Ryaninwisco
Plymouth, WI
Verified
I dont know the fitment of where this would normally be used, but for my application (c20 lower control arms) there was a considerable gap on the o.d. of the sleeve. I would have preferred a tighter fit. Yes, you weld these in but I had to account for about 1/8- 1/4". I have installed everything and pressed in the balljoint but not driven. Hopefully it holds up well (balljoint tightness and fit)
Would Recommend
I would purchase theses sleeves again.
5.0
6 years ago
John
Nixa, Missouri
Verified
These sleeves will help me fabricate new lower control arms for my car.
Would Recommend
Chev C10 / C20
5.0
7 years ago
none
Canada
Verified
I used these sleeves to weld into my Chev 1 ton lower control arm to accept a 1/2 ton ball joint . It worked so well that I'm glad I purchased additional . The Web was full of you cant use a 1 ton control arm on a 1/2 ton as the 1/2 ton ball joint is smaller , this proves you can and it just took some hunting , measuring and the ability to weld . Other than this the control arms are the same but far more HD . The upper ball joints are just a bolt in so nothing special there . Good luck on your projects
Would Recommend
Showing 3 of 3 reviews
Questions & Answers
2 Questions • 2 Answers
Questions & Answers
2 Questions • 2 Answers
Will this make a c20 lower control arm work with a c10 ball joint?
by Ron
• 2 years ago
1 answer
View Answer
will this fit 1967 camaro lower ball joint
by woody
• 10 years ago
1 answer
View Answer
2 of 2 questions shown