|
#91013910
$45.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 3-1/2 Inch Exhaust Tubing Diameter, Raw
| MFG. Part # | 91013910 |
| Brand | Speedway Motors |
| Exhaust Tubing Diameter | 3-1/2 Inch |
| Exhaust Pipe Type | Custom Tubing |
| Outside Diameter | 3.50" |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyComplete application specific exhaust systems are a great DIY option for increased performance and exhaust sound, but what if you’re building something custom (engine, driveline swaps, short bed conversions, etc.) or your ride is simply of the age that direct fit systems aren’t available, well then, you’re going to be building your own exhaust system. While we do offer complete universal exhaust systems, often you can work with part of the existing exhaust or header you have and only need a replacement section or elbow/bend to make things work. In these instances, our selection of mandrel exhaust bends, including elbows, U-bends, and more will most certainly help you get your exhaust system buttoned up and ready for the road.
Our 180-degree U-bend exhaust pipe provides a popular bend option often required when building a custom exhaust routing to clear drivetrain or chassis components or to travel over the rear axle. This 3-1/2-inch OD mandrel bent exhaust pipe features a 180-degree bend with a 5.00-inch radius, along with enough straight section to build starter tubes or provide an area to weld or use an exhaust pipe expander for installation. The mandrel exhaust bends provide maximum exhaust flow without reduction in interior diameter. Manufactured from stainless steel, the 180-degree U-bend exhaust pipe features a uniform .065-inch wall thickness throughout with a 13.00-inch overall length and a flared slip-fit end on one leg. Cut the exhaust tubing bends as needed, and slip-fit or weld together to create a compound bend to solve your exhaust routing needs.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91013910 |
| Brand | Speedway Motors |
| Exhaust Tubing Diameter | 3-1/2 Inch |
| Exhaust Pipe Type | Custom Tubing |
| Outside Diameter | 3.50" |
| GENERAL | |
| Material Type | 304 Stainless Steel |
| Finish | Raw |
| Exhaust Pipe Bend Style(s) | U-Bend |
| Exhaust Pipe Bend Angle(s) | 180 degree |
| Exhaust Pipe Bend Radius(es) | 5.00" |
| Material Thickness | .065" |
| Mandrel Bent | Yes |
| Pipe Length 1 | 6.25" |
| Overall Width | 13.57" |
| Center to Center | 10.00" |
| Sold in Quantity | Each |
| Tube Shape | Round |
Be the first to ask a question.
