Sprint Left Front Brake Kit with Wilwood Rotor

We put together this left front brake kit for the racer looking for the best quality while keeping cost down. Included is a Wilwood Dynalite caliper with 3.25" mounts, 2 brake pads, a 10.95" Wilwood rotor and rotor mounting bolts.

Rotors-

Wilwoods 3 hole mount rotors are precision CNC machined from high strength billet plate. Full symmetrical machining provides perfect balance, perfect flatness and the truest rotation of any rotor being built. These rotors fit the popular 3 x 5.00" mount bolt circle found on most sprint and midget front hubs. Wilwoods engineered drill slot pattern combines the highest degree of weight reduction with the highest resistance to thermal distortion in the contact faces. You get smooth engagement and a consistent full pedal from the low knock-back characteristics of this design. A durable black anodized finish prevents corrosion and simplifies the visual inspection of the contact faces. The best results are always achieved using PolyMatrix Q compound brake pads with these rotors.

• Unsafe for street use & unsuitable for most forms of Racing.
• Special racing application only. IE. Dirt Sprint & Midget.
• Can result in catastrophic failure when misused.

Item Details

0.32 x 10.88
3 x 5" B.C

Calipers-

The Dyna Pro Single (DPS) billet caliper is the newest generation of calipers available as an upgrade or replacement for applications previously using the Dynalite Single (DLS) series. DPS calipers combine superior strength with performance enhancements to make these the best "Dyna" series calipers ever.

The DPS is loaded with exclusive Wilwood performance enhancements. The calipers feature Quick-E-Clip pad retainers that support a 6812 type brake pad from the top. In addition to past pad service without caliper removal, the feature provides substantially stronger retention over the single Quick-Clip pin and 7012 type pads used in the previous DLS models.

• Quick-E-Clip pad retainers supports brake pad from top
• Heavy wall stainless steel pistons
• Stainless steel SRS bridge plates eliminate pad rattle and dampen vibration
• Internal fluid passages
• Four corner bleed screws allow mounting in any front, rear, left, or right side position

Item Details

3.25" mounting center, .380" rotor