|
#91720243
$26.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Steel, Painted, Black, 3.00" Tube O.D.
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91720243 |
| Brand | Speedway Motors |
| GENERAL | |
| Material Type | Steel |
| Finish | Painted |
| Sold in Quantity | Each |
| Notes | Will fit a spring with OD as large as 5" and ID as small as 3-3/8" |
| Color | Black |
| Tube O.D. | 3.00" |
| Overall Diameter | 5.00" |
| Outside Diameter | 3.30" |
| Material Thickness | .13" |
4.9
35 Reviews
Customers highly recommend this product for its high quality, great pricing, and perfect fit. They particularly appreciate its versatility, being both clampable and weldable. Though welding may affect the product's powder coating, users find this a minor issue given its overall performance. The spring perches are deemed excellent for racing springs, contributing an easy and supportive installation process. Some users had to modify parts slightly for offset, but the product's practicality for race cars and hot rod axles garnered significant praises. The product's confirmed qualities trumped competitors' offerings, prompting customers to express repeated purchase intent.
4.9
35 reviews
5
31
4
3
3
1
2
0
1
0
Most Liked Positive Review
5.0
So easy to position, good quality
Versatile! You can clamp in place, tack weld corners, or permanently finish weld it. Powder coat is nice if you clamp, gets a bit messed up if you weld, not a big deal. My 300 pound springs are properly seated and loosely centered. Fits exactly to 3 inch diameter axle tube. Great piece.maverick
Most Liked Negative Review
3.0
Nice product but needs work.
Tube welded on to locate coil spring is too large for the factory spring to fit over it. I have cut the larger tube off and have a correct size tube to weld on when the whole job goes to the chassis fab shop for welding. Why is a weld on part powder coated? It would have been easier to make my own part and $25 cheaper.
Filter by Ratings
Yes
5.0
a year ago
None
Du quoin il
Verified
Worked and fit fine
Would Recommend
Yes
5.0
2 years ago
Kane
Everett PA
Verified
Used on my new Ford 9in housing in my Buick
Would Recommend
I will buy this again big time saver!
5.0
2 years ago
@67BroncoGuy
Maine
Verified
Using these spring mounts on a 93 bronco to convert the rearend to coil springs. Will purchase more in the future for a couple of demolition derby 9" rear conversions into Crown Vics.
Would Recommend
I have used this product before and it works great
5.0
2 years ago
Js
Randle washington
Verified
Just all around good products Works great
Would Recommend
I would buy these again
5.0
2 years ago
TO4john
East Liverpool Ohio
Verified
These are very easy to set on and tack in place
Would Recommend
Good parts great prices
5.0
3 years ago
Paul
Medina ohio
Verified
Id buy these again
Would Recommend
Good quality part
5.0
3 years ago
Lberry
Okmulgee ok
Verified
I use it for my new ford 12" rearend for gbody build .
Would Recommend
Fits perfect comes as advertised. Nice product good price
5.0
4 years ago
Team 57
Assonet Ma.
Verified
Set on rear-end and weld it fits nice
Would Recommend
great quality part for the price
5.0
4 years ago
Mike Bollinger
wisconsin
I just finished up installing these on my 10 bolt in my race car. For the money these are really good perches, i did have to modify them a little bit for offset because you cant get a 3/4 inch offset perch. but otherwise they are pretty good. Keep in mind these are not for stock pigtail springs, these are made for 5" racing springs. i went the welded route which ruined the powder coat, but you can also clamp them, either would work.
Would Recommend
Nice part for the miney
5.0
5 years ago
Hotrod rob
Maiden nc
Verified
Nice part for the money
Showing 10 of 35 reviews
2 Questions • 2 Answers
Can this be used for the top and bottom using the spring #91043101
by Jimmy
• 15 years ago
1 answer
View Answer
I was wondering what size the top tube is? The outside diameter
by sucker
• 15 years ago
1 answer
View Answer
2 of 2 questions shown
