|
#91043810
$55.99
/kit
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 6.00" Thread Length, 2.50" Overall Width
| MFG. Part # | 91043810 |
| Overall Length | 5.00" |
| Overall Width | 2.50" |
| Overall Height | 3.00" |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyKit includes 2 extruded aluminum lowering blocks complete with four 1/2" U-bolts and hardware. Blocks are 2-1/2" wide x 5" long. U-bolts fit 3" diameter axle housings and are 10" long. 9/16" pin diameter.
Charts
910-43810 Instructions (PDF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91043810 |
| Brand | Speedway Motors |
| Overall Length | 5.00" |
| Overall Width | 2.50" |
| Overall Height | 3.00" |
| Material Type | Aluminum |
| GENERAL | |
| Thread Length | 6.00" |
| Thread Pitch | 1/2"-20 |
| Sold in Quantity | Kit |
| Notes | U bolt is 10" x 3". |
4.8
30 Reviews
Review summaries highlight the product's high quality, easy installation, effectiveness in lowering vehicles as advertised, and excellent fitting. Users report that the blocks are well-made, robust, and crafted from nice aluminum. The product's particular strength is its compatibility with various car models, offering a versatile solution. The perfect length I-bolts included received positive notes. However, some users note issues with u-bolt shapes and alignment pin sizes. This pushing aside, customers are generally satisfied, often noting the product improves their car's stance. Such attributes place the product a step ahead of its competitors.
4.8
30 reviews
5
27
4
2
3
0
2
0
1
1
Most Liked Positive Review
5.0
Just right
Tech help always is welcomed and correct. This time lowering my '39 Chev coupe was somewhat of a puzzle as to how low to go. Tech got it right the first time...car looks great! Thanks Speedway folks.
Most Liked Negative Review
1.0
Detail missing in add description
I ordered this lowering block kit for a 1956 Chevrolet. With the amount of parts supplied for tri-fives I didn't think I would have been an issue. When delivered the male/female alignment studs were 9/16" diameter instead of the 1/2" required for all tri-five cars. (Universal?) No where in the add did it list the actual alignment pin/bore sizes. Called customer service and shipped the kit back. But I'm still out the $9.00 in shipping to return this item.
Filter by Ratings
Yes
4.0
10 months ago
Kerry
Smithville mo
Verified
U bolts were to short
Would Recommend
Perfect fit
5.0
a year ago
Joe
Lincoln, NE
Verified
This was exactly as described 2 blocks 4 U bolts. worked perfectly on my 63 Galaxie.
Would Recommend
I would buy these again
5.0
a year ago
Mikie
Santa Rosa, CA
Verified
Lower the car perfect
Would Recommend
I would buy this product again
5.0
2 years ago
Rabbit
Va
Verified
Used it for my 1984 c10 pick up I'm restoring
Would Recommend
Really Solid Product!
5.0
2 years ago
Fahrenheit Motorsports
Las Cruces, NM
Verified
For the price these are the way to go. Very sturdy. I will definitely be ordering these again. If you are getting these for the rear maybe consider shims to make sure the pinion angle is correct.
Would Recommend
Yes
5.0
2 years ago
Bruce
Medford Or
Verified
Lowering my hot rod
Would Recommend
Well made !
5.0
2 years ago
Oldcarguy
Savoy,Il
Verified
No issues, well made. They even came with instructions.
Would Recommend
yes
5.0
3 years ago
bill
Michigan
Verified
works grate
Would Recommend
Worked as it should
5.0
3 years ago
67 gm&ford
bowling green ky
Verified
I modified and used on a 67 camaro.. worked perfectly
Would Recommend
Worked perfect to drop my 98 S10!
5.0
3 years ago
Nick
Lincoln NE
Verified
Used to lower the rear end of my 98 Chevrolet S10. Easy to install and lowered 3" as advertised
Would Recommend
Showing 10 of 30 reviews
7 Questions • 9 Answers
What size alignment pin is used 9/16 or 5/8.
by Don
• 2 years ago
1 answer
View Answer
Do I have to extend my shocks to put 3 inch lowering blocks on a 1963 Ford Galaxie the shock bolt to the bottom plate
by Rich
• 9 years ago
3 answers
View Answers
How to measure the leaf springs to have an idea what kit to order?
by Mauro
• 9 years ago
1 answer
View Answer
Will this work with a 1949 gmc 1/2 ton or what wons would u recommend I buy
by Aj
• 10 years ago
1 answer
View Answer
Can I use these on the front and the rear springs on a 1953 Chevy 3100 Truck?
by Adam
• 10 years ago
1 answer
View Answer
Will this kit work on a 1975 Pontiac Trans Am?
by CJ
• 10 years ago
1 answer
View Answer
Will I have to substitute three inch shorter shocks with this kit?
by
• 14 years ago
1 answer
View Answer
7 of 7 questions shown
