Street Rod Heater, 12 Volt 20,000 BTU, Universal for Hot Rods

#910454

Street Rod Heater, 12 Volt 20,000 BTU, Universal for Hot Rods

Name: Street Rod Heater, 12 Volt 20,000 BTU, Universal for Hot Rods
Brand: Speedway Motors
SKU: 910454
Price: 226.99 USD
Availability: InStock
Rating: 4.7 (42 reviews)

42 Reviews

9 Questions

This universal street rod heater gives you the option of heat in your custom ride
The compact size of 9.5" x 6.5" x 4.5" makes this easy to locate under your dash
Features a 2 speed 12 volt fan making this perfect for use in almost any water cooled automobile

$226.99

/each

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Universal Fit, 9.50" Overall Width, 6.5" Overall Height

This universal street rod heater gives you the option of heat in your custom ride
The compact size of 9.5" x 6.5" x 4.5" makes this easy to locate under your dash
Features a 2 speed 12 volt fan making this perfect for use in almost any water cooled automobile
20,000 BTU rated output is sure to warm you up on those cold mornings during a hot rod run
The adjustable louver allows you to direct the hot air flow as needed

See more details

Key Specs

MFG. Part #	910454
Brand	Speedway Motors

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 910454 Details

These all new universal street rod heaters give you the option of heat in your custom ride with the ease of installation. They feature a compact size, two-speed fan, and rear fan guard.

9-1/2" x 6-1/2" x 4-1/2" box dimensions
- 8” deep overall (from front of chrome grille to back of motor)
- 4-1/2” box depth (not including front grille or motor)
- Front grille protrudes 1/2” forward from face of box
- Motor protrudes 3” rearward from back of box
Adjustable louver to direct heat flow
12V 20,000 BTU heater
Has rear exit hose connections for convenient mounting
5/8" male connections for use with 5/8" ID heater hose
2-Speed fan (red wire high speed - orange wire low speed)

Charts

Universal Street Rod Heater Installation Instructions (PDF)

Guides & Documents

Heater Assemblies Installation Instructions (910454)

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

Speedway Motors 910454 Specifications

KEY SPECS
MFG. Part #	910454
Brand	Speedway Motors

GENERAL
Overall Width	9.50"
Overall Height	6.5"
Depth	8"
Voltage	12 volts
Sold in Quantity	Each
Notes	C-C Outlets tubes: 3 inches

Ratings & Reviews

4.7

42 Reviews

Overall Assessment

Customers praise this heater for its excellent heat output, compact size, and good value for money. It's described as being easy to install and efficient, with many customers expressing they would buy it again. Despite the need for some fabrication work, such as filing the switch to fit bracket and possibility of needing to create mounting brackets, the overall consensus is that it is a high-quality, practical product. The unit's performance in cold climates is particularly highly rated, with positive feedback about its ability to quickly heat vehicle interiors ranging from cars to tractors, even in extremely cold weather.

Write A Review

4.7

42 reviews

Most Liked Positive Review

5.0

Just the right size.

I drive my 1932 ford pickup year round. The winters in Denver aren't to bad the roads stay clear most of the time but it is COLD. I had a little motor aid heater just didn't cut it. I installed this unit this week and what a difference. On low speed heats the cab fast and really a good amount of warm air. On high makes way more heat than I expected. Easy to install was a plus under a tight dash. So glad to see this in your catalog. Michael L.

Most Liked Negative Review

3.0

decent heater, needs some redesign

I purchased (3) three of these heaters to install in street rods. The rocker switch would not install in plastic housing, too wide by about 1/32 inch. The mounting brackets were approximately 1/2 inch short to accommodate flush mounting because the fan motor protruded past the brackets. Fan motors fairly noisy, especially on high speed. On the positive side, small, compact, and attractive, but, with the sharp corners on the sheet metal housing.

Filter by Ratings

Sort Reviews

First class heater

5.0

8 months ago

Mikey

Central VA.

Verified

The heater is compact and includes all the parts necessary to hook it up other than heater hoses. It works like a dream and includes a 2 speed fan.

Would Recommend

I would not buy it again

3.0

a year ago

Sir

Meriden CT

Verified

Heater for a 1958 GMC. It's sturdy and works fine. But the fan on high is way too loud and the wiring diagram is wrong and the supplied hi-lo switch can't be mounted unless you have a drill that cuts rectangles. For 2 bills I expected better.

Would Not Recommend

THE SERVICE WAS GREAT. PLEASANT PHONE EXPERIENCE IN ORDERI

4.0

2 years ago

PAPA

PERKINSVILLE, VT

Verified

ONLY THINGS WERE: HAD TO MAKE A MOUNTING PLATE BECAUSE THE MOTOR PROTRUDED OUT FURTHER THAN THE MOUNTING LEGS. THE SWITCH DIDN'T FIT THE MOUNTING PLATE SO I USED MY OWN SWITCH. ALL WORKS GREAT . NICE TO HAVE HEAT!!

Would Recommend

I WOULD BUY THIS AGAIN FOR SURE

5.0

4 years ago

PHIL

MAINE

Verified

GREAT HEATER, EASY HOOK UP

heater assembly

5.0

5 years ago

Cheyenne Wy

Verified

Installed in a 1951 Ford F1. Mounts effortlessy. Works perfectly

Would Recommend

Good, but be prepared for possible fabrication work

4.0

5 years ago

Ken

Michigan

Fits well in my '31 Ford roadster. My issue is that the brackets are too short to mount the heater to the firewall without substantial spacers, or cutting a hole in the firewall for the blower motor. My mounting required fabbing brackets. Not a major issue, but it would have been better to have this thought through at the manufacturer's end. Also, depending on how you set up your brackets, you may end up pinching the hose grommets. Finally, requiring the hose connections to be made inside the vehicle seems like a leak looking to happen inside the car.

Would Recommend

Fantastic heater

5.0

5 years ago

Old plow jeep

Michigan

Verified

Puts out great heat really like it

Would Recommend

I didn't know about drilling through carpeting.

4.0

5 years ago

WaynB

Tucson, AZ

Verified

I didn't know that when you drill through carpeting the carpet ends up on the end of your drill bit. You should have warned me in the instructions. The heater came with no directions with where to put the mounting brackets so they ended up in front of where they eventually were mounted. Drilling through the floor was no easy task either. When I drilled a hole, I couldn't find it once the carpet was back on the floor. I have thick carpeting in a 1969 Lincoln Continental and that was part of my problem.

Would Recommend

I would buy this product again

5.0

5 years ago

Dad

St louis mo

Verified

Worked great now my son has heat in his car.car warms in no time!

Would Recommend

Puts out the heat!

5.0

5 years ago

Sparky 164

Verified

Can't complain much about this little heater. It does what it's designed to do.I didn't use the switch that came with because I wanted something a little more period correct for my coupe. Overall a great addition.

Would Recommend

Load More Reviews

Showing 10 of 42 reviews

Questions & Answers

9 Questions • 9 Answers

Sort Questions

Will this run on 24 volt system?

by Dave

• 6 years ago

1 answer

View Answer

Does the motor have to be wired positive to the switch and neg. to ground. My car is positive ground. I can switch it to neg ground if necessary, but would prefer to leave it as is.

by Gary

• 8 years ago

1 answer

View Answer

Does the heater come with any mounting brackets? If not, are those available from Speedway?

by Partzhead

• 10 years ago

1 answer

View Answer

would this heater be sufficient in a small cabin vehicle in, lets say, 10*f climate?

by jimram

• 10 years ago

1 answer

View Answer

there are two heater outlets on the back of the unit...which one is inlet and which one is outlet...i just bought the heater thanks

by joe

• 11 years ago

1 answer

View Answer

aux heating I read in the pdf instructions this is used as an aux. heating source.Does this mean that you have to use it in conjunction with the primary unit or a stand alone system

by Hoosiergasser

• 11 years ago

1 answer

View Answer

how many amps does the heater draw at 12 volts? I put it in a mg TD and I get too much air flow

by Norman

• 12 years ago

1 answer

View Answer

Plenum kits available? Is it possible to add venting for defrosting or rear heat?

by Frankenstein

• 12 years ago

1 answer

View Answer

Do the meaurements include the fan motor protruding out of the rear of the unit?

by Horst

• 12 years ago

1 answer

View Answer

9 of 9 questions shown