|
#9109521
$163.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Oval Track Cars
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 9109521 |
| Brand | Speedway Motors |
3.7
3 Reviews
Customers appreciate the well-constructed, lightweight aluminum tank which provides consistent bleeder settings. Its fluid-filled gauge makes usage smooth. Some minor issues occurred such as initial pressure loss and a misaligned air-gauge, which can be easily fixed by customers themselves. In comparison to competitors, users recommend this tank for its base functioning, strength, and minimal weight despite a few finishing touches needed.
3.7
3 reviews
5
1
4
0
3
2
2
0
1
0
Filter by Ratings
Hopefully won't have to but yes.
5.0
2 months ago
Mick
Mesa AZ
Verified
It does it's job.
Would Recommend
Good Product, missing some finishing touches
3.0
10 years ago
Nate
York Pa
Verified
This tank is a very well constructed aluminum piece with a nice fluid filled gage. When I first received the tank I put a few psi in it and let it sit, just as a check to make sure it held pressure. What I found was it bled down quickly with no bleeders inserted. Upon further examination I found that the bleeder adapter has some sort of liquid thread sealant that was still wet. I removed the adapter, cleaned it up and put pipe tape on it. The next issue that I found was a leaky valve stem. That just turned out to be a loose shrader valve. I tightened that and then finally got to use the tank. I really like the system. My bleeder setting is very consistent with this tank and it works nice. I would have given it 5 stars if there weren't small finishing touches that I had to address.
Would Recommend
Good but not perfect
3.0
11 years ago
LMSS14
Sioux Falls, SD
Verified
This tank seems to be well built and very light weight. The basic function works fine however the built in air gauge is off by 4 pounds. Also, the air gauge only goes up to 15psi. If you need pressures above that you will need to use a separate gauge or replace the one on the tank.
Would Not Recommend
Showing 3 of 3 reviews
Be the first to ask a question.
